Installation & Licensing

Installation & Licensing

Reply
Member
5 Posts
0 Kudos
Registered: ‎04-21-2012
Post 1 of 10
Accepted Solution

Revit 2013 Install Hangs

4468 Views, 9 Replies
04-21-2012 06:02 PM

I am trying to install Revit 2013 on a windows 7 machine that meets all the requirements, I have updated everything, and stopped the antivirus, but the install still hangs.

 

I have attached the install log and would appreciate help with suggestions. Thanks.

 

I've seen it go twice as long as that sometimes.  Try letting it run overnight just as a test.  If it isn't installed in the morning, you have issues.  :-D

*Expert Elite*
10,876 Posts
897 Kudos
Registered: ‎01-14-2005
Post 2 of 10

Re: Revit 2013 Install Hangs

04-22-2012 10:15 AM in reply to: dannelson2000

Have you tried just waiting it out? 

Member
5 Posts
0 Kudos
Registered: ‎04-21-2012
Post 3 of 10

Re: Revit 2013 Install Hangs

04-22-2012 01:43 PM in reply to: TravisNave

I have let it run probablly about 3 hours. I would expect that it should install within that time.

 

Does what you see in the log file suggest that it is still going but is just slow?

 

 

*Expert Elite*
10,876 Posts
897 Kudos
Registered: ‎01-14-2005
Post 4 of 10

Re: Revit 2013 Install Hangs

04-22-2012 01:48 PM in reply to: dannelson2000

I've seen it go twice as long as that sometimes.  Try letting it run overnight just as a test.  If it isn't installed in the morning, you have issues.  :-D

Active Member
6 Posts
0 Kudos
Registered: ‎04-23-2012
Post 5 of 10

Re: Revit 2013 Install Hangs

04-23-2012 06:57 AM in reply to: dannelson2000

Hi there,I've had this issue and this is what i did, First make sure you have internet access and that the Proxy is set correctly (If you use a proxy server try giving the machine full outbound) and try to run the install with an admin account.

 

Member
5 Posts
0 Kudos
Registered: ‎04-21-2012
Post 6 of 10

Re: Revit 2013 Install Hangs

04-23-2012 10:19 PM in reply to: TravisNave

I ran it over night and it was installed by morning. Phew!

 

Thanks for your help!

Active Member
12 Posts
6 Kudos
Registered: ‎10-06-2011
Post 7 of 10

Re: Revit 2013 Install Hangs

04-27-2012 07:08 PM in reply to: dannelson2000

So the solution is what? To wait for 8 hours to install a program?

Member
5 Posts
0 Kudos
Registered: ‎04-21-2012
Post 8 of 10

Re: Revit 2013 Install Hangs

04-27-2012 09:37 PM in reply to: gpktm

In my case yes.

*Expert Elite*
10,876 Posts
897 Kudos
Registered: ‎01-14-2005
Post 9 of 10

Re: Revit 2013 Install Hangs

04-27-2012 09:46 PM in reply to: dannelson2000
New Member
1 Posts
0 Kudos
Registered: ‎03-15-2014
Post 10 of 10

revit 2013 - how to fix the tool" mode"

03-15-2014 06:44 AM in reply to: dannelson2000

well,I also has the pronlem with revit 2013.

when I click " extrusion" and finish drawing a square, it doest show any hint in the tool bar as" MODE",which has the tick meaning OK.!!

Just hope someone can help me fix.....thx a lot

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post