Installation & Licensing

Installation & Licensing

Reply
Member
dannelson2000
Posts: 5
Registered: ‎04-21-2012
Message 1 of 10 (4,357 Views)
Accepted Solution

Revit 2013 Install Hangs

4357 Views, 9 Replies
04-21-2012 06:02 PM

I am trying to install Revit 2013 on a windows 7 machine that meets all the requirements, I have updated everything, and stopped the antivirus, but the install still hangs.

 

I have attached the install log and would appreciate help with suggestions. Thanks.

 

I've seen it go twice as long as that sometimes.  Try letting it run overnight just as a test.  If it isn't installed in the morning, you have issues.  :-D

*Expert Elite*
TravisNave
Posts: 10,446
Registered: ‎01-14-2005
Message 2 of 10 (4,332 Views)

Re: Revit 2013 Install Hangs

04-22-2012 10:15 AM in reply to: dannelson2000

Have you tried just waiting it out? 

Member
dannelson2000
Posts: 5
Registered: ‎04-21-2012
Message 3 of 10 (4,326 Views)

Re: Revit 2013 Install Hangs

04-22-2012 01:43 PM in reply to: TravisNave

I have let it run probablly about 3 hours. I would expect that it should install within that time.

 

Does what you see in the log file suggest that it is still going but is just slow?

 

 

*Expert Elite*
TravisNave
Posts: 10,446
Registered: ‎01-14-2005
Message 4 of 10 (4,324 Views)

Re: Revit 2013 Install Hangs

04-22-2012 01:48 PM in reply to: dannelson2000

I've seen it go twice as long as that sometimes.  Try letting it run overnight just as a test.  If it isn't installed in the morning, you have issues.  :-D

Active Member
RBG-UK-CAD
Posts: 6
Registered: ‎04-23-2012
Message 5 of 10 (4,293 Views)

Re: Revit 2013 Install Hangs

04-23-2012 06:57 AM in reply to: dannelson2000

Hi there,I've had this issue and this is what i did, First make sure you have internet access and that the Proxy is set correctly (If you use a proxy server try giving the machine full outbound) and try to run the install with an admin account.

 

Member
dannelson2000
Posts: 5
Registered: ‎04-21-2012
Message 6 of 10 (4,257 Views)

Re: Revit 2013 Install Hangs

04-23-2012 10:19 PM in reply to: TravisNave

I ran it over night and it was installed by morning. Phew!

 

Thanks for your help!

Active Member
gpktm
Posts: 12
Registered: ‎10-06-2011
Message 7 of 10 (4,130 Views)

Re: Revit 2013 Install Hangs

04-27-2012 07:08 PM in reply to: dannelson2000

So the solution is what? To wait for 8 hours to install a program?

Member
dannelson2000
Posts: 5
Registered: ‎04-21-2012
Message 8 of 10 (4,127 Views)

Re: Revit 2013 Install Hangs

04-27-2012 09:37 PM in reply to: gpktm

In my case yes.

*Expert Elite*
TravisNave
Posts: 10,446
Registered: ‎01-14-2005
Message 9 of 10 (4,125 Views)

Re: Revit 2013 Install Hangs

04-27-2012 09:46 PM in reply to: dannelson2000
New Member
towngirl
Posts: 1
Registered: ‎03-15-2014
Message 10 of 10 (701 Views)

revit 2013 - how to fix the tool" mode"

03-15-2014 06:44 AM in reply to: dannelson2000

well,I also has the pronlem with revit 2013.

when I click " extrusion" and finish drawing a square, it doest show any hint in the tool bar as" MODE",which has the tick meaning OK.!!

Just hope someone can help me fix.....thx a lot

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.