Installation & Licensing

Installation & Licensing

Reply
Member
5 Posts
0 Kudos
Registered: ‎04-21-2012
Post 1 of 10
Accepted Solution

Revit 2013 Install Hangs

4474 Views, 9 Replies
04-21-2012 06:02 PM

I am trying to install Revit 2013 on a windows 7 machine that meets all the requirements, I have updated everything, and stopped the antivirus, but the install still hangs.

 

I have attached the install log and would appreciate help with suggestions. Thanks.

 

I've seen it go twice as long as that sometimes.  Try letting it run overnight just as a test.  If it isn't installed in the morning, you have issues.  :-D

*Expert Elite*
10,937 Posts
904 Kudos
Registered: ‎01-14-2005
Post 2 of 10

Re: Revit 2013 Install Hangs

04-22-2012 10:15 AM in reply to: dannelson2000

Have you tried just waiting it out? 

Member
5 Posts
0 Kudos
Registered: ‎04-21-2012
Post 3 of 10

Re: Revit 2013 Install Hangs

04-22-2012 01:43 PM in reply to: TravisNave

I have let it run probablly about 3 hours. I would expect that it should install within that time.

 

Does what you see in the log file suggest that it is still going but is just slow?

 

 

*Expert Elite*
10,937 Posts
904 Kudos
Registered: ‎01-14-2005
Post 4 of 10

Re: Revit 2013 Install Hangs

04-22-2012 01:48 PM in reply to: dannelson2000

I've seen it go twice as long as that sometimes.  Try letting it run overnight just as a test.  If it isn't installed in the morning, you have issues.  :-D

Active Member
6 Posts
0 Kudos
Registered: ‎04-23-2012
Post 5 of 10

Re: Revit 2013 Install Hangs

04-23-2012 06:57 AM in reply to: dannelson2000

Hi there,I've had this issue and this is what i did, First make sure you have internet access and that the Proxy is set correctly (If you use a proxy server try giving the machine full outbound) and try to run the install with an admin account.

 

Member
5 Posts
0 Kudos
Registered: ‎04-21-2012
Post 6 of 10

Re: Revit 2013 Install Hangs

04-23-2012 10:19 PM in reply to: TravisNave

I ran it over night and it was installed by morning. Phew!

 

Thanks for your help!

Active Member
12 Posts
6 Kudos
Registered: ‎10-06-2011
Post 7 of 10

Re: Revit 2013 Install Hangs

04-27-2012 07:08 PM in reply to: dannelson2000

So the solution is what? To wait for 8 hours to install a program?

Member
5 Posts
0 Kudos
Registered: ‎04-21-2012
Post 8 of 10

Re: Revit 2013 Install Hangs

04-27-2012 09:37 PM in reply to: gpktm

In my case yes.

*Expert Elite*
10,937 Posts
904 Kudos
Registered: ‎01-14-2005
Post 9 of 10

Re: Revit 2013 Install Hangs

04-27-2012 09:46 PM in reply to: dannelson2000
New Member
1 Posts
0 Kudos
Registered: ‎03-15-2014
Post 10 of 10

revit 2013 - how to fix the tool" mode"

03-15-2014 06:44 AM in reply to: dannelson2000

well,I also has the pronlem with revit 2013.

when I click " extrusion" and finish drawing a square, it doest show any hint in the tool bar as" MODE",which has the tick meaning OK.!!

Just hope someone can help me fix.....thx a lot

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!