Installation & Licensing

Installation & Licensing

New Member
Posts: 1
Registered: ‎09-27-2007
Message 1 of 3 (686 Views)

NVIDIA Quadro 4000 and AutoCAD/C3D 2014?

686 Views, 2 Replies
07-17-2013 08:29 AM

Is the NVIDIA Quadro 4000 going to be certified for AutoCAD/C3D 2014? That card is not showing up on any of the 2014 Lists.

*Expert Elite*
Posts: 10,486
Registered: ‎01-14-2005
Message 2 of 3 (679 Views)

Re: NVIDIA Quadro 4000 and AutoCAD/C3D 2014?

07-17-2013 10:29 AM in reply to: TDenson

Don't get too hung up on the lists.  Autodesk isn't going to certify every card.  I always lead with the disclaimer that a card that has a WHQL certified driver, is certified.


You can get a WHQL certified driver for this card on and you'll be just fine with AutoCAD 2014.  I have a few machines left in my enterprise that run this card without issues. 

*Expert Elite*
Posts: 5,534
Registered: ‎10-12-2006
Message 3 of 3 (670 Views)

Re: NVIDIA Quadro 4000 and AutoCAD/C3D 2014?

07-17-2013 11:16 AM in reply to: TravisNave

Its a little overkill for basic AutoCAD work, unless you are also using ReCap or other software that is heavily dependant on OpenGL.

If you are going to fly by the seat of your pants, expect friction burns.
Adopt. Adapt. Overcome. Or be overcome.
A good question will be halfway to a good answer.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.