Installation & Licensing

Installation & Licensing

Reply
*Michales, Tom
Message 1 of 4 (152 Views)

Moving adlm

152 Views, 3 Replies
02-04-2000 08:15 AM
I need to move my licence server from it's present home on an NT server
and I have many questions. I have read that what I need to do is install
and uninstall so that is what I plan to do.
1) I can move to either a Novell 4.11 server or an old NT workstation
3.51.Which is perferable and is it posible or legal to make the other a
backup or redundant server.
2) What is the reauthorization process?
3)The workstations were deployed from an image on the server.Can that
remain and is there anything that needs to be changed on the
workstations if the license server is moved.
Thanks in advance for your help.
Chris Hughes
*Milana, Jerry
Message 2 of 4 (152 Views)

Re: Moving adlm

02-04-2000 02:03 PM in reply to: *Michales, Tom
Tom,

If you move the AdLM to a Netware server, you will have to remove AutoCAD
from the workstations, build IPX deployments and deploy them to the
workstations. If you move AdLM to a Windows server, you will not have to do
this. You may want to consider upgrading the NT 3.51 box to NT 4.0 for
supportability reasons. While I do not anticipate a problem running AdLM on
W NT 3.51, be aware that the build of AdLM shipped with AutoCAD 2000 was not
tested on W NT 3.51. The builds of AdLM shipped with AutoCAD 14 and 14.01
were tested on W NT 3.31.

Jerry Milana,
Autodesk Product Support

Tom Michales wrote:

> I need to move my licence server from it's present home on an NT server
> and I have many questions. I have read that what I need to do is install
> and uninstall so that is what I plan to do.
> 1) I can move to either a Novell 4.11 server or an old NT workstation
> 3.51.Which is perferable and is it posible or legal to make the other a
> backup or redundant server.
> 2) What is the reauthorization process?
> 3)The workstations were deployed from an image on the server.Can that
> remain and is there anything that needs to be changed on the
> workstations if the license server is moved.
> Thanks in advance for your help.
> Chris Hughes
*Schmidt, John
Message 3 of 4 (152 Views)

Re:

02-05-2000 02:49 PM in reply to: *Michales, Tom
>> The builds of AdLM shipped with AutoCAD 14 and 14.01
were tested on W NT 3.31.<<

3.31???



John
*Milana, Jerry
Message 4 of 4 (152 Views)

Re:

02-07-2000 11:40 AM in reply to: *Michales, Tom
OOPS ;} I mean 3.51
At least I know someone out there reads what I write........

Jerry

John Schmidt wrote:

> >> The builds of AdLM shipped with AutoCAD 14 and 14.01
> were tested on W NT 3.31.<<
>
> 3.31???
>
>
>
> John
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.