Installation & Licensing

Installation & Licensing

Reply
Member
LandesNS
Posts: 4
Registered: ‎02-20-2011
Message 1 of 12 (13,149 Views)

Microsoft Visual C++ 2005 Redistributable (x86) - Failed - Installation aborted

13149 Views, 11 Replies
02-20-2011 12:56 PM

This is the most progress I've made with my install of Autodesk Inventor 2010 (as Administrator).  I have Windows 7 and everything meets the software requirements.  After entering the S/N and Prod Key, and click Finish, I get back a message saying that the install failed.  The referenced log file reads:


2011/2/20:15:36:47 Administrator DAD-PC Install Microsoft Visual C++ 2005 Redistributable (x86) Failed Installation aborted, Result=1603
2011/2/20:15:36:53 Administrator DAD-PC === Setup ended ==

 

I checked under Control Panel (Programs) and I already have a number of C++ versions installed:

- Microsoft Visual C++ 2005 ATL Update kb973923 - x64 8.0.50727.4053

- Microsoft Visual C++ 2005 ATL Update kb973923 - x86 8.0.50727.4053

- Microsoft Visual C++ 2005 Redistributable (far right says version 8.0.58299)

- Microsoft Visual C++ 2005 Redistributable (far right says version 8.0.56336)

- Microsoft Visual C++ 2005 Redistributable (x64) (far right says version 8.0.56336)

- Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148

- Microsoft Visual C++ 2008 Redistributable x86 9.0.30729.17

 

Does one (or more) of these need to be removed?  Any advice how to proceed with the install and skip the C++ step?

Product Support
hashim.mundol
Posts: 1,458
Registered: ‎05-21-2010
Message 2 of 12 (13,129 Views)

Re: Microsoft Visual C++ 2005 Redistributable (x86) - Failed - Installation abor

02-20-2011 11:34 PM in reply to: LandesNS

Please try

 

http://forums.autodesk.com/t5/Installation-Licensing/Revit-MEP-2011-cannot-be-installed/m-p/

 

http://forums.autodesk.com/t5/Installation-Licensing/Autocad-2011-Installation-trouble-error-1603/m-...

---------------------------------------------------------------------------------------
If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!
For more tips & tricks: http://upandready.typepad.com



Hashim Mundol
Autodesk Product Support
Autodesk, Inc.

Member
LandesNS
Posts: 4
Registered: ‎02-20-2011
Message 3 of 12 (13,115 Views)

Re: Microsoft Visual C++ 2005 Redistributable (x86) - Failed - Installation abor

02-21-2011 06:19 AM in reply to: LandesNS

I had already tried everything in the second link.

 

As for the first one - how do I edit my registry?  That's something I have never done.

Product Support
hashim.mundol
Posts: 1,458
Registered: ‎05-21-2010
Message 4 of 12 (13,111 Views)

Re: Microsoft Visual C++ 2005 Redistributable (x86) - Failed - Installation abor

02-21-2011 06:33 AM in reply to: LandesNS

Backup registry

 

http://support.microsoft.com/kb/322756

 

edit registry

http://support.microsoft.com/kb/136393

---------------------------------------------------------------------------------------
If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!
For more tips & tricks: http://upandready.typepad.com



Hashim Mundol
Autodesk Product Support
Autodesk, Inc.

Member
LandesNS
Posts: 4
Registered: ‎02-20-2011
Message 5 of 12 (13,002 Views)

Re: Microsoft Visual C++ 2005 Redistributable (x86) - Failed - Installation abor

03-02-2011 12:31 PM in reply to: hashim.mundol

Ok, I finally tried this out.  It did not work.

The first registry item was not listed.

As for the second registry item - what was I supposed to change?  Put a hyphen in front of the name?

Product Support
hashim.mundol
Posts: 1,458
Registered: ‎05-21-2010
Message 6 of 12 (12,939 Views)

Re: Microsoft Visual C++ 2005 Redistributable (x86) - Failed - Installation abor

03-07-2011 12:43 AM in reply to: LandesNS

Please try this

 

http://xsisupport.wordpress.com/2011/02/03/installation-aborted-result1603/

---------------------------------------------------------------------------------------
If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!
For more tips & tricks: http://upandready.typepad.com



Hashim Mundol
Autodesk Product Support
Autodesk, Inc.

Member
LandesNS
Posts: 4
Registered: ‎02-20-2011
Message 7 of 12 (12,846 Views)

Re: Microsoft Visual C++ 2005 Redistributable (x86) - Failed - Installation abor

03-12-2011 05:29 AM in reply to: LandesNS

This is the same response as posted prviously, just in a different spot.

 

My question still stands - it says to "rename" the key - but rename it to what????  Rename implies that you are calling it something else.

Product Support
hashim.mundol
Posts: 1,458
Registered: ‎05-21-2010
Message 8 of 12 (12,823 Views)

Re: Microsoft Visual C++ 2005 Redistributable (x86) - Failed - Installation abor

03-13-2011 06:21 AM in reply to: LandesNS

you can rename with "old_" as prefix. or you can delete the key (please take a bakup before you do this)

 

---------------------------------------------------------------------------------------
If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!
For more tips & tricks: http://upandready.typepad.com



Hashim Mundol
Autodesk Product Support
Autodesk, Inc.

New Member
fding
Posts: 2
Registered: ‎04-25-2012
Message 9 of 12 (8,963 Views)

Re: Microsoft Visual C++ 2005 Redistributable (x86) - Failed - Installation abor

04-25-2012 10:58 PM in reply to: LandesNS

go to 3rd party folder, and install it seperately. I works for me

New Member
ohaiyao
Posts: 1
Registered: ‎06-26-2012
Message 10 of 12 (8,336 Views)

Re: Microsoft Visual C++ 2005 Redistributable (x86) - Failed - Installation abor

06-26-2012 02:12 AM in reply to: LandesNS

If you have installed on your computer vc2005 please uninstall

Then run \ 3rdParty \ x86 \ VCRedist folder, 2005 vcredist_x86 and 2008 vcredist_x86

 

 Check the system folder AppData \ Local \ Tmp below whether generate  the log of vcredist

If there is  

 

just setup! good luck!

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.