Installation & Licensing

Installation & Licensing

Reply
Active Member
robert_hudson
Posts: 9
Registered: ‎02-15-2012
Message 1 of 15 (3,148 Views)
Accepted Solution

Inventor 2012 Installation Error 1935

3148 Views, 14 Replies
02-15-2012 08:06 PM

I've tried just about everything I could find on the internet for a solution to this and still no luck. (Including deleting temp, registry fix, updates, .NET Framework checking, and others).

 

error2.png

after talking to some friends who work at Cisco. One by one I went and uninstalled windows security updates as they believed they were the root of all evil involving autodesk. After I uninstalled all the ones I was allowed to, no luck. 

 

My solution? Well I own a Lenovo and they're awesome. 4 clicks and 1 hour later all my files were backed up, Windows was reset to factory default, files restored, and then I went on to successfully install Autodesk Inventor 2012. Today is a good day. 

 

 

Thanks to everyone that read this thread and/or tried to help me solve the problem!

Employee
alison.gangler
Posts: 125
Registered: ‎04-12-2010
Message 2 of 15 (3,097 Views)

Re: Inventor 2012 Installation Error 1935

02-17-2012 10:16 AM in reply to: robert_hudson

Hi,

 

Please refer to the following post from the Windows Seven Forums regarding a similar issue when installing the Microsoft Visual C++ Redistributable package:

 

http://www.sevenforums.com/performance-maintenance/40511-set-registry-size-limit-unlimited-2.html

 

The posting indicates that the following steps will resolve the issue:

 

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control
Key: RegistrySizeLimit
Type: REG_DWORD
Value: 0xffffff (4294967295)

Reboot

As a Administrator open a Command Prompt and run "SFC /SCANNOW". The command should complete successfully and if any errors were found, they should be corrected.

 

It is always strongly recommended to fully back up the registry prior to making any modifications.

 

I hope this helps.

 

Cheers,

Alison

___________________________________________________________

If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!



Alison Gangler
IPG - ICP Install Engineer
Autodesk, Inc.

Active Member
robert_hudson
Posts: 9
Registered: ‎02-15-2012
Message 3 of 15 (3,042 Views)

Re: Inventor 2012 Installation Error 1935

02-27-2012 09:00 AM in reply to: alison.gangler

Any chance you could give me some steps to perform this?

 

I did what I thought would be correct. 

 

- Backed up the registry

- went to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control

-created key RegistrySizeLimit

-set type to REG_DWORD

-set vaulue to 0xffffff (4294967295)

-performed clean boot 

-attempted reinstall

 

xx Failed with the same error message at the same point

 

Active Member
robert_hudson
Posts: 9
Registered: ‎02-15-2012
Message 4 of 15 (3,036 Views)

Re: Inventor 2012 Installation Error 1935

02-27-2012 09:56 AM in reply to: robert_hudson

Also, I checked for errors as you mentioned (forgot to include that in the last post)

Active Member
robert_hudson
Posts: 9
Registered: ‎02-15-2012
Message 5 of 15 (3,024 Views)

Re: Inventor 2012 Installation Error 1935

02-27-2012 06:40 PM in reply to: robert_hudson

here is a screenshot of my attempt at a registry edit

*Expert Elite*
TravisNave
Posts: 10,446
Registered: ‎01-14-2005
Message 6 of 15 (3,012 Views)

Re: Inventor 2012 Installation Error 1935

02-28-2012 09:50 AM in reply to: robert_hudson

Just uninstall your Visual C++ and run the installer again.

 

ControlPanel.png

Active Member
robert_hudson
Posts: 9
Registered: ‎02-15-2012
Message 7 of 15 (3,004 Views)

Re: Inventor 2012 Installation Error 1935

02-28-2012 02:08 PM in reply to: TravisNave

Travis, I removed Visual C++ as you stated then attempted a reinstall. No luck. So i removed more (because well... why not) after restarting and having attempted another isntall. 

 

The only thing that changed was now Autodesk Design Review installed, but still no inventor. 

*Expert Elite*
TravisNave
Posts: 10,446
Registered: ‎01-14-2005
Message 8 of 15 (3,000 Views)

Re: Inventor 2012 Installation Error 1935

02-28-2012 02:39 PM in reply to: robert_hudson

You have admin rights?  UAC off?  Antivirus disabled?  Media or download install? 

Active Member
robert_hudson
Posts: 9
Registered: ‎02-15-2012
Message 9 of 15 (2,997 Views)

Re: Inventor 2012 Installation Error 1935

02-28-2012 03:35 PM in reply to: TravisNave

Admin Rights - check (even used install as admin during setup just to rule it out)

UAC - off

Microsoft Security Essentials - off

No other anti virus has ever been installed or used, I just freeze my C:

 

It's the download install - here is some log file. Thanks for your help as well

 

2012/2/28:16:59:06 Robert Hudson ROBERTHUDSON Inventorui== Parameter: Page2 Action: SetMsiProperty Item: PRODUCTEDITION Value:INVPROSA


2012/2/28:16:59:06 Robert Hudson ROBERTHUDSON PageOpen ProductSelectionDialog2


2012/2/28:16:59:27 Robert Hudson ROBERTHUDSON PageOpen FullProgressDialog


2012/2/28:16:59:27 Robert Hudson ROBERTHUDSON Installing DirectX® Runtime: C:\Autodesk\Autodesk_Inventor_2012_English_Win_64bit\3rdParty\DirectX\DXSETUP.exe /silent


2012/2/28:16:59:51 Robert Hudson ROBERTHUDSON Install DirectX® Runtime Succeeded


2012/2/28:16:59:51 Robert Hudson ROBERTHUDSON Installing Microsoft Windows Media Format 9.5 Series Runtime: C:\Autodesk\Autodesk_Inventor_2012_English_Win_64bit\3rdParty\x64\wmf\95\wmfdist64.exe /quiet


2012/2/28:16:59:54 Robert Hudson ROBERTHUDSON Install Microsoft Windows Media Format 9.5 Series Runtime Failed Failure is ignored, Result=1603


2012/2/28:16:59:54 Robert Hudson ROBERTHUDSON Installing Autodesk® Inventor® 2012: TRANSFORMS="C:\Autodesk\Autodesk_Inventor_2012_English_Win_64bit\x64\en-us\Inventor\inventor.mst;C:\Users\ROBERT~1\AppData\Local\Temp\_AI6C59.tmp\x64\inventor\inventor-standalone.mst" ADSK_EULA_STATUS=#1 ADSK_SOURCE_ROOT="C:\Autodesk\Autodesk_Inventor_2012_English_Win_64bit\" INSTALLDIR="C:\Program Files\Autodesk\Inventor 2012\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

 

2012/2/28:17:05:33 Robert Hudson ROBERTHUDSON Install Autodesk® Inventor® 2012 Failed Installation aborted, Result=1603


2012/2/28:17:05:33 Robert Hudson ROBERTHUDSON Rollback DirectX® Runtime Failed Failure is ignored, Result=1619

Active Member
robert_hudson
Posts: 9
Registered: ‎02-15-2012
Message 10 of 15 (2,992 Views)

Re: Inventor 2012 Installation Error 1935

02-28-2012 04:50 PM in reply to: robert_hudson

So looking at the logs, I actually paid attention and noticed that the error occured when installing file at path 

 

C:\Autodesk\Autodesk_Inventor_2012_English_Win_64bit\3rdParty\x64\wmf\95\wmfdist64.exe /quiet

 

which is microsoft windows media something or other 9.5? So i found that path, attempted a manual install, but i get error message "not enough storage is available to process this command" I assume this is where the real issue lies but again, I have no idea what to do /:

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.