Is there anything that I can do to make AutoDesk Building Design Suite Ultimate 2013 run more efficiently on the following models of hardware? I know when we went to the 2011 Edition I had to enable the 3GB switch in Windows XP so Revit would stop crashing.
AutoDesk Building Design Suite Ultimate 2013 - Specifications:
http://usa.autodesk.com/autocad/system-requirements/
http://usa.autodesk.com/revit/system-requirements/
HP Compaq dc7800 Ultra-slim Desktop PC
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06b/12454-12454-64287-321860-3328898-3459242-3459247-36933...
Processor: Intel Core 2 Duo (E6750 @ 2.66GHz)
HP Compaq dc7900 Ultra-slim Desktop PC
http://h10010.www1.hp.com/wwpc/us/en/en/WF06a/12454-12454-64287-321860-3328898-3785404.html?dnr=1
Processor: Intel Core 2 Duo (E8500 @ 3.16GHz)
HP Compaq 8000e Ultra-slim Desktop PC
http://h10010.www1.hp.com/wwpc/ca/en/sm/WF06b/12454-12454-64287-3328898-3328898-4065899-4097378.html...
Processor: Intel Core 2 Duo (E8500 @ 3.16GHz)
HP Z400 Workstation
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12454-12454-296719-307907-4231338-3718668.html?dnr=1
Processor: Intel® Xeon® Quad-Core Processor W3520 (2.66 GHz, 8 MB cache, 1066 MHz memory)
All Models will run Windows 7 Enterprise 64bit with 4GB of RAM.
4gigs is probably not enough
i would start at 8 gigs and go up from there
DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.