Installation & Licensing

Installation & Licensing

Reply
Contributor
bishara
Posts: 17
Registered: ‎12-03-2011
Message 1 of 31 (3,245 Views)
Accepted Solution

Error 1603 and 1619 during Revit 2012 installation

3245 Views, 30 Replies
12-05-2011 07:37 AM

I am trying to install the student version of Revit 2012 on windows 7 and I through the serial number part, but as it installing, it just aborts.  When I look at the installation log, I see errors 1603 and 1619.  I check some solutions here and re-installing windows was what one person did, but I cannot do that.

 

Please help.

IT FINALLY WORKED!!!

 

I did your suggestion along with some help from Geek Quad at Best Buy.  Thanks so much for your help!

Product Support
hashim.mundol
Posts: 1,458
Registered: ‎05-21-2010
Message 2 of 31 (3,232 Views)

Re: Error 1603 and 1619 during Revit 2012 installation

12-06-2011 06:34 AM in reply to: bishara

1603 is generic permission error, please try to install the software in diagnostics mode as described here

http://usa.autodesk.com/getdoc/id=TS75218

If the issue persists, please post the all the log files from the %temp% folder (start->run/search->type %temp% ->Enter) as a zip file.

---------------------------------------------------------------------------------------
If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!
For more tips & tricks: http://upandready.typepad.com



Hashim Mundol
Autodesk Product Support
Autodesk, Inc.

Contributor
bishara
Posts: 17
Registered: ‎12-03-2011
Message 3 of 31 (3,221 Views)

Re: Error 1603 and 1619 during Revit 2012 installation

12-06-2011 10:56 AM in reply to: bishara

Hi Hashim,

 

Thanks for the suggestion, but I tried the diagnostic mode and it still failed.  I attached here the installation log so you can see the errors.

 

Please let me know if you have ideas.

 

Thanks!

Product Support
hashim.mundol
Posts: 1,458
Registered: ‎05-21-2010
Message 4 of 31 (3,202 Views)

Re: Error 1603 and 1619 during Revit 2012 installation

12-07-2011 12:30 AM in reply to: bishara

Please try

 

http://forums.autodesk.com/t5/Installation-Licensing/Autocad-Electrical-2012-won-t-install/m-p/32442...

---------------------------------------------------------------------------------------
If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!
For more tips & tricks: http://upandready.typepad.com



Hashim Mundol
Autodesk Product Support
Autodesk, Inc.

Contributor
bishara
Posts: 17
Registered: ‎12-03-2011
Message 5 of 31 (3,187 Views)

Re: Error 1603 and 1619 during Revit 2012 installation

12-07-2011 08:21 AM in reply to: bishara

Still not working for some reason.  I looked at my control panel and it shows Visual C++ 2005 Redist to be installed.

 

I have attached the new installation log.

 

This time when I tried to install, a popup came up right before installation attempted.  The popup said windows installer has failed. 

 

 

Product Support
hashim.mundol
Posts: 1,458
Registered: ‎05-21-2010
Message 6 of 31 (3,184 Views)

Re: Error 1603 and 1619 during Revit 2012 installation

12-07-2011 08:27 AM in reply to: bishara

error in the log is still about

 

Installing Microsoft Visual C++ 2005 SP1 Redistributable

 

Please uninstall all VC++ components and install it manually as described in the other posts

 

 

 

 

---------------------------------------------------------------------------------------
If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!
For more tips & tricks: http://upandready.typepad.com



Hashim Mundol
Autodesk Product Support
Autodesk, Inc.

Contributor
bishara
Posts: 17
Registered: ‎12-03-2011
Message 7 of 31 (3,175 Views)

Re: Error 1603 and 1619 during Revit 2012 installation

12-07-2011 01:29 PM in reply to: bishara

Hi Hashim,

 

I tried it.  I uninstalled all VC++ components and then installed from the microsoft website.

 

It is still providing the same errors.  Could I be installing the wrong versions?  I am using these links:

 

http://www.microsoft.com/download/en/details.aspx?id=5555

http://www.microsoft.com/download/en/details.aspx?id=5638

http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=29

 

Best,

Bishara

Product Support
hashim.mundol
Posts: 1,458
Registered: ‎05-21-2010
Message 8 of 31 (3,165 Views)

Re: Error 1603 and 1619 during Revit 2012 installation

12-08-2011 04:39 AM in reply to: bishara

Assuming the error is still about VC++ runtime

Links are almost correct for 32 bit OS. (except for the 2008 one)

 

 

http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5638 

http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5582 

http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5555 

 

Have you done a complete windows update ?

Have these installations gone through successfullly ? if yes

 

Another option would be to clean all the VC++ components and let the revit installer do this part.

 

If it fails, please post the detailed logs from the %temp% folder for the vc++ part.

 

---------------------------------------------------------------------------------------
If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!
For more tips & tricks: http://upandready.typepad.com



Hashim Mundol
Autodesk Product Support
Autodesk, Inc.

Contributor
bishara
Posts: 17
Registered: ‎12-03-2011
Message 9 of 31 (3,157 Views)

Re: Error 1603 and 1619 during Revit 2012 installation

12-08-2011 08:47 AM in reply to: bishara

Still not working.

 

I removed all vc++ components and let revit install them.  It did not work.  It only installed 2005 and 2008 and then failed.

 

Then when I try to get you the temp files, the only folder in the Temp folder that is related to VC++, is VC++2010.  And there are some 2010 related text docs, but I can't open them????  It says access denied.

 

Can I get in touch with anyone at Autodesk to help me?  Maybe with a shared screen to solve the issue?

 

I really need to get this installed so I can do some work for my class.

 

Thanks.

Product Support
hashim.mundol
Posts: 1,458
Registered: ‎05-21-2010
Message 10 of 31 (3,155 Views)

Re: Error 1603 and 1619 during Revit 2012 installation

12-08-2011 08:50 AM in reply to: bishara

Were you able to install VC++ 2010 manually ?

 

---------------------------------------------------------------------------------------
If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!
For more tips & tricks: http://upandready.typepad.com



Hashim Mundol
Autodesk Product Support
Autodesk, Inc.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.