Installation & Licensing

Installation & Licensing

Reply
Member
serraandrea
Posts: 3
Registered: ‎04-14-2012
Message 1 of 8 (1,099 Views)

Autodesk alias design & surface

1099 Views, 7 Replies
04-14-2012 05:25 AM

After the installation of Autodesk alias design, i'm not able to open the application, a message "The application was unable to start correctly (0xc0000142). Click ok to close the application" appear. My Computer is a Windows 7 ultimate x 64 based. I have verified that net framework is installed an work properly (netfx setup verifier tested) both version 2 sp2, 3.5 sp1  and 4.

Could you give me some suggestion?

*Expert Elite*
TravisNave
Posts: 10,626
Registered: ‎01-14-2005
Message 2 of 8 (1,086 Views)

Re: Autodesk alias design & surface

04-15-2012 03:44 PM in reply to: serraandrea

Login an another user profile with local adming rights and UAC disabled and see if you have the same issue.  It could be a Windows profile issue.

Member
serraandrea
Posts: 3
Registered: ‎04-14-2012
Message 3 of 8 (1,075 Views)

Re: Autodesk alias design & surface

04-16-2012 10:10 AM in reply to: TravisNave

Thank you very much for your answers TravisNave, i've tried to install to a new user profile with admin right and uac disabled, but i had the same issues. Same issues after trying to uninstall and reinstall .net framework 4 in the original user. It Is working creating a virtual machine with vmware 8 windows 8 consumer preview x64 where there are small problem with vmware graphic card. So i think it is better to use the hardware of my computer that is medium-high level.

Are there other tentative to do without reinstalling everithing?

 

 

*Expert Elite*
TravisNave
Posts: 10,626
Registered: ‎01-14-2005
Message 4 of 8 (1,071 Views)

Re: Autodesk alias design & surface

04-16-2012 11:20 AM in reply to: serraandrea

Not really.  Windows 8 isn't supported for this application so you shouldn't expect a high likelihood of this working.  Good luck!

Member
serraandrea
Posts: 3
Registered: ‎04-14-2012
Message 5 of 8 (1,069 Views)

Re: Autodesk alias design & surface

04-16-2012 12:02 PM in reply to: TravisNave

My i make the last tentative using .NET Framework Cleanup tool or is risky?

*Expert Elite*
TravisNave
Posts: 10,626
Registered: ‎01-14-2005
Message 6 of 8 (1,066 Views)

Re: Autodesk alias design & surface

04-16-2012 12:16 PM in reply to: serraandrea

No, not for Windows 8 since .NET is built-into the OS.  It will not work in the fashion that you think.  To bypass it, you will have to modify the setup.ini file to remove the prerequisite check for .NET Framework.  I have posted a solution to this if you care to do a search.  I do not promote it though, since it is unsupported. 

New Member
nickel5nic
Posts: 1
Registered: ‎08-19-2012
Message 7 of 8 (999 Views)

Re: Autodesk alias design & surface

08-19-2012 06:13 PM in reply to: serraandrea

Will the autdesk alias automotive design program coorporate with the new windows 8 that's coming out? Because I've heard that the autocad isn't cooporative with windows 8

*Expert Elite*
TravisNave
Posts: 10,626
Registered: ‎01-14-2005
Message 8 of 8 (987 Views)

Re: Autodesk alias design & surface

08-20-2012 11:52 AM in reply to: nickel5nic

Nothing is supported for Windows 8 yet because it hasn't be released.  Likely Autodesk 2014 products will be.  It's possible that some 2013 products will be certified on it, but that is of no concern at the moment. 

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!