Installation & Licensing

Installation & Licensing

Reply
Active Member
bmaconie
Posts: 9
Registered: ‎01-29-2002
Message 1 of 5 (125 Views)

ACAD 2000i Network deployment Installation Problem

125 Views, 4 Replies
07-13-2000 10:30 AM
When I try to create a client deployment on the network e.g.

\\Central\SYS2\APPS\AutoDesk\D_Drive\A2Ki

I get a 'Network Setup Wizard' message box which states:

The path \\Central\SYS2\ is write-protected.
The Network Setup Wizard need to create
installation deployments of AutoCAD 2000i in this location.

Why is the installer looking to write anything in a location not specified?

This problem didn't occur with other releases.
\\Central\SYS2\ is the root of a Netware Volume and shouldn't be used by any software.
*Wedding, James
Message 2 of 5 (125 Views)

Re: ACAD 2000i Network deployment Installation Problem

07-14-2000 06:02 AM in reply to: bmaconie
I don't think you can have spaces in a deployment location for some reason.
Saw that somewhere, but don't hold me to it, OK?

HTH--
James Wedding, E.I.T.
IT Manager
Jones & Boyd, Inc.
Dallas, TX

Remove NOSPAM for reply

"bmaconie" wrote in message
news:ef2b150.-1@WebX.SaUCah8kaAW...
> When I try to create a client deployment on the network e.g.
>
> \\Central\SYS2\APPS\AutoDesk\D_Drive\A2Ki
>
> I get a 'Network Setup Wizard' message box which states:
>
> The path \\Central\SYS2\ is write-protected.
> The Network Setup Wizard need to create
> installation deployments of AutoCAD 2000i in this location.
>
> Why is the installer looking to write anything in a location not
specified?
>
> This problem didn't occur with other releases.
> \\Central\SYS2\ is the root of a Netware Volume and shouldn't be used by
any software.
*milana, jerry
Message 3 of 5 (125 Views)

Re:

07-14-2000 06:01 PM in reply to: bmaconie
James,

You are correct. Spaces in the share name have been known to cause install
problems.

Jerry Milana,
Autodesk Product Support

"James Wedding" wrote in message
news:ef2b150.0@WebX.SaUCah8kaAW...
> I don't think you can have spaces in a deployment location for some
reason.
> Saw that somewhere, but don't hold me to it, OK?
>
> HTH--
> James Wedding, E.I.T.
> IT Manager
> Jones & Boyd, Inc.
> Dallas, TX
>
> Remove NOSPAM for reply
>
> "bmaconie" wrote in message
> news:ef2b150.-1@WebX.SaUCah8kaAW...
> > When I try to create a client deployment on the network e.g.
> >
> > \\Central\SYS2\APPS\AutoDesk\D_Drive\A2Ki
> >
> > I get a 'Network Setup Wizard' message box which states:
> >
> > The path \\Central\SYS2\ is write-protected.
> > The Network Setup Wizard need to create
> > installation deployments of AutoCAD 2000i in this location.
> >
> > Why is the installer looking to write anything in a location not
> specified?
> >
> > This problem didn't occur with other releases.
> > \\Central\SYS2\ is the root of a Netware Volume and shouldn't be used by
> any software.
>
Active Member
bmaconie
Posts: 9
Registered: ‎01-29-2002
Message 4 of 5 (125 Views)

Re:

07-27-2000 07:20 AM in reply to: bmaconie
There are no spaces in the following:

\\Central\SYS2\APPS\AutoDesk\D_Drive\A2Ki

Is an underscore a problem also?
*Dawe, Anthony
Message 5 of 5 (125 Views)

Re:

06-11-2001 02:28 AM in reply to: bmaconie
Did this problem (which I am now experiencing on a new parallel install)
ever get resolved?

Thanx, Tony
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.