Installation & Licensing

Installation & Licensing

Reply
*Becker, Craig J.
Post 1 of 6

Acad 14 and Acad2000 same Network

166 Views, 5 Replies
11-05-1999 01:58 PM
We recently upated some of our AutoCad clients to 2000 from rev. 14 and now
the NetWare 5 server loses the license for both rev 14 & 2000. The ADLM
loads fine on the server, but when you try to access the license nothing
happens. The only way to get it to work is to reboot the server. Is this a
NEW problem with the Autocad 2000 license. We weren't having this problem
until the 2000 license was installed.

Any help is appreciated,
-Craig
cbecker@ci.arvada.co.us
*Land, Greg
Post 2 of 6

Re: Acad 14 and Acad2000 same Network

11-05-1999 01:58 PM in reply to: *Becker, Craig J.
We are looking at upgrading R14.01 to Acad2K. We have two seperate
groups at this location. I want to upgrade my group to 2k and leave the
other group on R14.01. Can this be done on the same server? Possibly
installing software into seperate network drives?

Re:

11-05-1999 01:58 PM in reply to: *Becker, Craig J.
We were doing that for a while but kept having problems...i suggest not
splitting like that...

Bill
Greg Land wrote in message
news:3805D5A6.2356A74F@egs-eg.com...
> We are looking at upgrading R14.01 to Acad2K. We have two seperate
> groups at this location. I want to upgrade my group to 2k and leave the
> other group on R14.01. Can this be done on the same server? Possibly
> installing software into seperate network drives?
>
*Land, Greg
Post 4 of 6

Re:

11-05-1999 01:58 PM in reply to: *Becker, Craig J.
I did read in an earlier message that you can actually run both versions using
the same adlm licensing software. Can anyone else verify this?

Bill wrote:

> We were doing that for a while but kept having problems...i suggest not
> splitting like that...
>
> Bill
> Greg Land wrote in message
> news:3805D5A6.2356A74F@egs-eg.com...
> > We are looking at upgrading R14.01 to Acad2K. We have two seperate
> > groups at this location. I want to upgrade my group to 2k and leave the
> > other group on R14.01. Can this be done on the same server? Possibly
> > installing software into seperate network drives?
> >

Re:

11-05-1999 01:58 PM in reply to: *Becker, Craig J.
Hello Greg,

Yes you can do it. You have one code for the 14.01 group and another for the A2k
group
running both the same adlm on the server.

Franck Hervet
st@aricad.fr

Greg Land a écrit :

> I did read in an earlier message that you can actually run both versions using
> the same adlm licensing software. Can anyone else verify this?
>
> Bill wrote:
>
> > We were doing that for a while but kept having problems...i suggest not
> > splitting like that...
> >
> > Bill
> > Greg Land wrote in message
> > news:3805D5A6.2356A74F@egs-eg.com...
> > > We are looking at upgrading R14.01 to Acad2K. We have two seperate
> > > groups at this location. I want to upgrade my group to 2k and leave the
> > > other group on R14.01. Can this be done on the same server? Possibly
> > > installing software into seperate network drives?
> > >
*Schroeder, Bud
Post 6 of 6

Re:

11-05-1999 01:58 PM in reply to: *Becker, Craig J.
I would suggest that you update to the Elan version on the AutoCAD 2000 CD though,
it has a few small changes over what R14.01 had. Not a lot, but it could come in
handy.

Take care.

Bud

aricad wrote:

> Hello Greg,
>
> Yes you can do it. You have one code for the 14.01 group and another for the A2k
> group
> running both the same adlm on the server.
>
> Franck Hervet
> st@aricad.fr
>
> Greg Land a écrit :
>
> > I did read in an earlier message that you can actually run both versions using
> > the same adlm licensing software. Can anyone else verify this?
> >
> > Bill wrote:
> >
> > > We were doing that for a while but kept having problems...i suggest not
> > > splitting like that...
> > >
> > > Bill
> > > Greg Land wrote in message
> > > news:3805D5A6.2356A74F@egs-eg.com...
> > > > We are looking at upgrading R14.01 to Acad2K. We have two seperate
> > > > groups at this location. I want to upgrade my group to 2k and leave the
> > > > other group on R14.01. Can this be done on the same server? Possibly
> > > > installing software into seperate network drives?
> > > >
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!