InfraWorks General Discussion

InfraWorks General Discussion

*Expert Elite*
Posts: 2,819
Registered: ‎04-27-2005
Message 1 of 3 (619 Views)

Weird Video Output

619 Views, 2 Replies
09-24-2012 05:33 PM

Anyone seen a video do something like this before?


Basically, some of the buildings don't stay put in the model as the camera flies through. It's really weird, they stay in the same place in the frame, but not all of them, just some of them. I've tried creating it with a couple different options.

Brian Hailey
My Blog
*Expert Elite*
Posts: 1,353
Registered: ‎09-05-2007
Message 2 of 3 (601 Views)

Re: Weird Video Output

09-25-2012 05:24 AM in reply to: BrianHailey

If you go into the Options, select 3D Generation, change your Generator Threads.  You might have to play around with the number.  I set my to a 10 and my buildings were jumping around like yours.  I then set it to a 4 and I haven't had any more issues.


4-4-2012 8-46-10 AM.png

If the issue was resolved by this method, please click on "Accept As Solution"
*Civil 3DJ*
Todd Rogers

Visit my blog here.

Posts: 5
Registered: ‎04-23-2012
Message 3 of 3 (483 Views)

Re: Weird Video Output

10-19-2012 02:11 AM in reply to: BrianHailey

Hi Brian!


I've seen this issue once before but it's very hard to reproduce. You could try generating your video on a different computer (with different graphics hardware) or updating your graphics driver.


I assume you are using Infrastructure Modeler 2012. Infrastructure Modeler 2013 R2 might solve the issue. We worked on the rendering core and the one time I saw your issue was before our changes. I can't promise though since, as said, the issue is very hard to reproduce.





Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.