InfraWorks General Discussion

InfraWorks General Discussion

Reply
Active Member
kauffman
Posts: 10
Registered: ‎08-22-2006
Message 1 of 3 (510 Views)

Ground Imagery Over Exposed

510 Views, 2 Replies
10-02-2012 06:31 AM

I have been experiencing this problem for quite some time and I cannot seem to find a way to resolve it. Hopefully someone will have a suggestion. When I import Ground Imagery, the contrast is often way too intense as if the image is over exposed or a contrast and brightness filter were applied improperly. I checked the image in Photoshop and the brightest areas are well below 255.255.255 RGB white. I would almost say that some shader is parcing the images wrong for the viewport. Has anyone else experienced this issue? Anyone found a way around it?</

Mark Kauffman
Project Visualization
Parsons Brinckerhoff, Inc.
*Expert Elite*
TRogers
Posts: 1,331
Registered: ‎09-05-2007
Message 2 of 3 (506 Views)

Re: Ground Imagery Over Exposed

10-02-2012 09:05 AM in reply to: kauffman

See my post at the link below and see if that helps....

 

http://forums.autodesk.com/t5/Autodesk-Infrastructure-Modeler/Odd-Image-Display/td-p/3604230

If the issue was resolved by this method, please click on "Accept As Solution"
*Civil 3DJ*
Todd Rogers

Visit my blog here.

     
Active Member
kauffman
Posts: 10
Registered: ‎08-22-2006
Message 3 of 3 (502 Views)

Re: Ground Imagery Over Exposed

10-02-2012 09:22 AM in reply to: TRogers

That's a negative. The image only appears to have the 3 color channels and not a 4th. My imagery is defaulting to a band mapping type of RGB. As a test to see what would happen, I switched to Gray and set band #1: red as the type. I get a grayscale image for the aerial as expected, but the white are completely blow out as before. Again, it is as if AIM is applying a contrast and brightness filter to the image.

Mark Kauffman
Project Visualization
Parsons Brinckerhoff, Inc.
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.