Infrastructure Map Server General Discussion

Infrastructure Map Server General Discussion

Reply
*Daniel, Scott D.
Message 1 of 5 (116 Views)

Drawings in MapGuide

116 Views, 4 Replies
06-20-2003 06:14 AM
I'm trying to add drawing information to my MapGuide Map. I have SDF, DB and
DWG data layers in my MapGuide map.
The coordinate system is Arbitrary US Feet.

One of the layers is a polyline SDF file of Water Mains exported from a
drawing in Autodesk Map.

Another layer (the problem one) is a drawing of text and dimensions created
from (wblocked out with 0,0 as the basepoint) the same drawing file that the
water mains were created from.
It didn't matter if I used the whole drawing file or not, the following is
still the issue.

When I bring them together in MapGuide 6.3 the Text/Dimension drawing data
appears to be shifted about 4 feet (units) to the left. Why?!?
What am I missing or doing wrong?

Thanks for any help you can provide.
Scott D. Daniel
GIS Supervisor
Ruekert · Mielke
W233 N2080 Ridgeview Parkway
Waukesha, WI 53188
(262) 542-5733
(262) 542-5631 Fax
sdaniel@ruekert-mielke.com
Member
bmauro
Posts: 3
Registered: ‎06-30-2003
Message 2 of 5 (116 Views)

Re: Drawings in MapGuide

06-30-2003 06:17 AM in reply to: *Daniel, Scott D.
try inserting the text block back into the original drawing using 0,0 as the insertion point. Did this line up properly? If no then the problem stems from autocad not mapguide.
*Daniel, Scott D.
Message 3 of 5 (116 Views)

Re:

06-30-2003 10:52 PM in reply to: *Daniel, Scott D.
Good thought but that wasn't it. :smileysad: The block of
Dims came back into the original drawing right where they're supposed to
be.

I measured a little more accurately the distance of
the difference. The drawing is approximately 4.9 ft left and 1.7 feet down
from the sdf/db-point data.


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
try
inserting the text block back into the original drawing using 0,0 as the
insertion point. Did this line up properly? If no then the problem stems from
autocad not mapguide.
Contributor
barryk
Posts: 13
Registered: ‎08-27-2003
Message 4 of 5 (116 Views)

Re: Drawings in MapGuide

07-14-2003 10:17 PM in reply to: *Daniel, Scott D.
Do both of the drawings have their Units set the same?

e.g. Format > Units > Drag and drop scale (previously Design Center). I have found this to be a source of problems.

Barry Kelly
GeoSpatial Web Services
*Daniel, Scott D.
Message 5 of 5 (116 Views)

Re:

07-18-2003 12:24 AM in reply to: *Daniel, Scott D.
yes


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
Do
both of the drawings have their Units set the same?

e.g. Format > Units > Drag and drop scale (previously Design Center).
I have found this to be a source of problems.

Barry Kelly
GeoSpatial Web Services

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.