Infrastructure Map Server General Discussion

Infrastructure Map Server General Discussion

Reply
Contributor
samorim
Posts: 12
Registered: ‎09-24-2002
Message 1 of 5 (966 Views)

Can Autodesk Mapguide 6.5 work with the Oracle Spatial Client 10g?

966 Views, 4 Replies
03-26-2007 12:59 PM
Hello

We have a question: Can the Autodesk Mapguide 6.5 work with the Oracle Spatial Client 10g?
Our Oracle database has version 10g and the Oracle Client installed on the same computer as Provider for Oracle Spatial for Autodesk MapGuide is 10g and the mapguide can do a query to database when the Autodesk Mapguide Server's spatial filter is enabled. In this case, it happens error message in erro1.jpg and the layer can't be showed. If the Autodesk Mapguide Server's spatial filter is disabled the layer is showed normally. Is there any problem with the Provider for Oracle Spatial for Autodesk MapGuide and Oracle client 10g?

regards,
*Andy Morsell
Message 2 of 5 (966 Views)

Re: Can Autodesk Mapguide 6.5 work with the Oracle Spatial Client 10g?

03-26-2007 01:53 PM in reply to: samorim
Currently MapGuide 6.5 works with 10g R1 only. There is a patch being
released which will allow 10g R2 compatibility.


--
Andy Morsell, P.E.
Spatial Integrators, Inc.
http://www.SpatialGIS.com


wrote in message news:5531235@discussion.autodesk.com...
Hello

We have a question: Can the Autodesk Mapguide 6.5 work with the Oracle
Spatial Client 10g?
Our Oracle database has version 10g and the Oracle Client installed on the
same computer as Provider for Oracle Spatial for Autodesk MapGuide is 10g
and the mapguide can do a query to database when the Autodesk Mapguide
Server's spatial filter is enabled. In this case, it happens error message
in erro1.jpg and the layer can't be showed. If the Autodesk Mapguide
Server's spatial filter is disabled the layer is showed normally. Is there
any problem with the Provider for Oracle Spatial for Autodesk MapGuide and
Oracle client 10g?

regards,
*Albert Kálmán
Message 3 of 5 (966 Views)

Re: Can Autodesk Mapguide 6.5 work with the Oracle Spatial Client 10g?

03-26-2007 11:50 PM in reply to: samorim
I tested MG 6.5 with Oracle 10g R2 and it works .... I used the new
topobase with R2 and I have wander if could I see data stored in oracle in
Mg 6.5? , yes it's live :smileyhappy:) very nice.
Same for XE.

Kalmy







"Andy Morsell" wrote in message
news:5531313@discussion.autodesk.com...
Currently MapGuide 6.5 works with 10g R1 only. There is a patch being
released which will allow 10g R2 compatibility.


--
Andy Morsell, P.E.
Spatial Integrators, Inc.
http://www.SpatialGIS.com


wrote in message news:5531235@discussion.autodesk.com...
Hello

We have a question: Can the Autodesk Mapguide 6.5 work with the Oracle
Spatial Client 10g?
Our Oracle database has version 10g and the Oracle Client installed on the
same computer as Provider for Oracle Spatial for Autodesk MapGuide is 10g
and the mapguide can do a query to database when the Autodesk Mapguide
Server's spatial filter is enabled. In this case, it happens error message
in erro1.jpg and the layer can't be showed. If the Autodesk Mapguide
Server's spatial filter is disabled the layer is showed normally. Is there
any problem with the Provider for Oracle Spatial for Autodesk MapGuide and
Oracle client 10g?

regards,
Employee
dswilson
Posts: 730
Registered: ‎09-14-2006
Message 4 of 5 (966 Views)

Re: Can Autodesk Mapguide 6.5 work with the Oracle Spatial Client 10g?

03-27-2007 07:36 AM in reply to: samorim
There are issues when attempting to use Oracle 10gR2 with MapGuide 6.5. Oracle has revised the SRID data such that the WKT strings contain EPSG codes embedded in the middle of the strings. MapGuide 6.5 is not capable of dealing with this change. As a workaround users can define their own SRID entry and remove the extra EPSG information for each coordinate system they use.

Regards,
Dave


Dave Wilson
SQA Analyst
AEC IM
Autodesk, Inc.

New Member
rob_kromwijk
Posts: 1
Registered: ‎01-14-2013
Message 5 of 5 (850 Views)

Re: Can Autodesk Mapguide 6.5 work with the Oracle Spatial Client 10g?

01-14-2013 06:46 AM in reply to: samorim

HI,

 


I'm having issues using Mapguide 6.5 and oracle 10g and it's related to the coordinate reference system. When I try to retrieve data from the oracle 10g database, I'm getting the following error:

"autodesk maguide server error: 558-14: error encountered while parsing spatial reference system: PROJCS["Netherlands National System", GEOGCS [ "Netherlands Bessel", DATUM ["Netherlands Bessel", SPHEROID ["Bessel 1841", 6377397.155, 299.1528128]], PRIMEM [ "Greenwich", 0.000000 ], UNIT ["Decimal Degree", 0.01745329251994330]], PROJECTION ["Stereographic"], PARAMETER ["Scale_Factor", 0.999908], PARAMETER ["Central_Meridian", 5.387639], PARAMETER ["Latitude_Of_Origin", 52.156161], PARAMETER ["False_Easting", 155000.000000], PARAMETER ["False_Northing", 463000.000000], UNIT ["Meter", 1.000000000000]]"

 

 

When I compare the cs string with the previous one in my oracle 9i database, it's exactly the same. And I didn't had problems using oracle 9i, since a defined my own srid.

 

Mapguide server 6.5.5.7

Oracle server 10.2.0.5

Oracle client 10.2.0.5

 

Any solutions?

thanks, Rob

 

PS. I know mapguide 6.5 and oracle 10g are outdated, but for the moment they're no alternativesfor our application.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!