Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
It would be nice to be able to window select surfaces for use with the Thicken command. When shell fails, I need to resort to thickening individual faces. This is a laborious task when 100's of faces are involved
Can we also extend this functionality to include the "Delete Face" Command? I ran across a scenario recently with some complex geometry for a mold and had to deconstruct some solid geometry to get to the cavity and runners for the mold. I tried to use the combine, derive - subtract an assembly, and copy objects tools, but couldn't get those to go. Similar to MattH, I found it time consuming to have to pick individual surfaces until I could eliminate enough surfaces to use the lump selection option for "Delete Faces". If this should be posted under a different idea, please let me know and I can do that. If you have any questions, please do not hesitate to contact me. Hope all is well and have a most blessed night!
This idea has been implemented within Autodesk Inventor 2016. Special thanks to the author of this Idea and likewise to everyone who cast your Kudo for it.