When Creating Assets, often I have to repeatedly republish the asset. It would be nice to have a Republish workflow that could do the following with one button:
- publish to same folder
- publish with the same asset name (to overwrite)
- Set 2D View Options.
Also, if the asset has already been published, these setting should be remembered.
When we create a sublayout from an existing factory layout, we can choose the name of the sublayout but not it's location on the workspace. It would be great to add this ability in order to position the manufacturing lines were we want.
For example I have one building with 3 lines that I want to have in separate layouts to ease the implantation process. My ideal folder structure would be :
| - Customer01
| | - general_layout.iam
| | | - line01
| | | | - line01.iam
| | | - line02
| | | | - line02.iam
| - Customer02
| | - C2_general_layout.iam
With the actual settings, if I use the sublayout button directly in Inventor, all the sublayout (my lines in this example) will be in the workspace folder.
If one uses Factory Assets and Connectors to configure a new piece of equipment on a Factory Layout, it would be handy to publish this new equipment configuration as its own Factory Asset, from the Factory Layout environment. This is similar to the idea of "Creating Assets using Assets". Hope all is well and have a blessed day!
Would like the ability to deplay the DWG overlay in the Inventor drawing.
Also would like to able to create dimensions relative to the dwg overlay.
I believe this is a key feature missing from the factory design suite. This would allow me to present one drawing file that contains all the 2D and 3D representations.
Point clouds should know the scale of the document they are going into and attempt to scale accordingly. Point clouds typically are meter by meter by meter for scaling size - if the point cloud goes into a layout that is in MM it should scale - or if it is into an inch layout it should scale to imperial - if nothing else, have it work similar to block inserts in AutoCAD for the interaction. (see attached) IT is very confusing for the users in imperial - typically the cloud comes in 254x too small.
Would it be possible to add functionality to automate the creation of asset tags. For example if I have a sequence of items, like a conveyor line, I would like to add asset tags to each one and apply serial numbers. However, it is quite cumbersome to have to add asset tags to each one. It would be great if I could select on an item, say a component "Base:1" and then apply asset tags to each member of the family (Base:2, Base:3, etc.).
My initial thoughts would be to create a special workpoint / connector, to attach the asset tag, on each published asset. Then the command could be launched and a prefix could be assigned (maybe have the project number first, then the serial number) and Inventor would then go through each occurrence of the part and apply the next asset tag to it. If you have any questions, please do not hesitate to contact me. Hope all is well and have a most blessed night!
Today, when inserting a point cloud, the placement is arbitrary - that is, is selects the point I picked in space. That is NEVER where I want it.
- Allow me to snap the cloud to a point in my layout
-Allow me to send it to 0,0,0 if I wish (99% of the time this is what I would want)
Factory assets should have an attribute that allows the asset creator to specify what the default layer the asset should be assigned to when it is placed in a drawing. The benefit of this feature is time savings and repeatabiliyt of workflow.
This requirement was gathered at the customer roundtable in Milan, Oct 2012.
The user should be able to find where assets have been used - in what documents. Users should be able to update those assets and have the drawings reflect the changes. Teh benefit of the feature would be that it saves a significant amount of time searching for where an asset was used and manually replacing them.
This requirement was gathered at the customer roundtable in Milan, Oct 2012.
Please consider including AutoCAD Electrical in the suite to support wiring the equipment. ACE is already included in PrDS, FDS users could benefit also.
Also please consider adding AutoCAD MEP to add support for wiring and plumbing the building to run these utilities to the machine equipment.
If machinery moves it would be great if the building wiring/plumbing model could update.
This could provide an even more complete BOM of equipment and MEP requirements for a design layout.
Please don't raise the cost of FDS Ultimate.
If ACE or ACMEP cannot be included, please make them available as an add-on module for a reasonable cost (less than $500).
Thanks for your time and attention.
I am working on document factory layouts in the Inventor drawing environment, but have hit a snag. The drawing environment is great for creating my plan, iso and side views, but I don't seem to be able to bring the Asset Tags (haven't tried Descriptors yet) into the drawing environment. Can we add this functionality into the drawing environment to save time having to relabel the components? This could either be placed near the asset, like in the AutoCAD sync'd file, a property in a text box pull down or even something that could be placed into a parts list. If you have any questions, please do not hesitate to contact me. Hope all is well and have a most blessed day!
I had a chain of conveyors that I wanted to demote to a subassembly. When I demoted them to a factory layout, they were no longer connected. I could use the connect function and go through and connect them but it would be really nice for them to maintain the connection I already made for them.
Many times I'll break a layout up into sub-layouts. I'd like the ability to apply some sort of tag to objects that reside in a sub layout from the top level or an upper level layout. A good example would be adding operation tags - (ie OP 010, 020)
Currently asset tags attach to assets ONLY. With some of my customers equipment may never become an asset (one off, not re-used elsewhere) and they still need to be tagged. Perhaps these would have to be a different kind of tag - other than asset tag.
By creating an element with variants. No operations are updated when changing variant decals.
It should update all transactions without exception.
You should be able to edit the 2D block to be generated. To put elements in different layers, colors, line types, attributes, etc..
If you edit the generated 2D block factory (In AutoCAD Architecture for a change of color, line type, attributes, etc..), Might not work in AutoCAD flow -> Inventor correctly.
The user can specify in Inventor or AutoCAD the order that an asset is placed in a project. Factory Asset attributes can be used to specify the phase and/or order a given asset is commissioned. This information can be interpreted by Navisworks for the 4D / timeliner process.
Currently, if you use the feature property suppression option, (see attached) the suppression is not recognized when setting various levels of detail. I use this property for turning Clearance areas on and off. When there are multiple pieces of equipment that have these clearances, we use a Level of Detail to turn them all off or on as needed. Currently you have to actually suppress the part to add it to the Level of Detail in the assembly.
IF I am not snapping to a DWG or to a grid - I ALWAYS want to move my asset immediately after placement. I have to go and select reposition. Why not just have the reposition triad be the placement triad?
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Upgrading to a 2015 product? Make sure to check these out 1st!