To check the references of assembly components, you need to select the assembly configuration document tab, select the component parts, and then navigate to the component parts using "Go to Folder" and check them from the References tab. If the number of parts to be checked increases, you must frequently go back and forth between the assembly's configuration document tab and the component, which is time-consuming and labor-intensive. Therefore, we would like a tool that allows us to check references of assembly components easily. It would also be a very effective tool if multiple parts could be selected and exported for reference. Current functional problems (1) When there are multiple components you’d like to check references, it is time-consuming and tedious to go back and forth between the Assembly's Component Document tab and the Component's References tab. (2) Exporting references can only be done for each part. Number of times to move folders with the current function ... 2 times/per part Number of times to export references with the current functionality: Required for the number of parts. Number of times to move folders after the function is installed: 1 time/per part Number of times to export references after the function is installed: Only once Reduction in time (50 part searches per item, 300 searches/year); 700 hours 構成部品の参照先を確認するには、アセンブリの構成ドキュメントタブを選択して構成部品を選択したあと、「フォルダへ移動」で構成部品に移動し、参照先タブから確認しなければならない。確認したい部品点数が多くなるとアセンブリの構成ドキュメントタブと構成部品の行き来が頻繁になり、手間と時間がかかる。 よって、アセンブリの構成ドキュメントより確認したい構成部品を選択して行き来の回数を減らして参照先が確認出来るツールを搭載してほしい。 また、複数部品を選択して参照先のエクスポートができれば非常に有効なツールとなる。 現状機能問題点・・・ ①参照先を確認したい部品が複数ある場合、アセンブリの構成ドキュメントタブと構成部品の参照先タブの行き来が頻繁になり、手間と時間がかかる ②参照先のエクスポートは1部品ごとにしかできない 現状機能でのフォルダー移動回数・・・2回/1部品当り 現状機能での参照先エクスポート回数・・・部品点数分必要 機能搭載後のフォルダー移動回数・・・1回/1部品当り 機能搭載後の参照先エクスポート回数・・・1回のみ 削減時間(1件部品点数50点検索、検索回数300回/年);700時間
Show More