Hallo Vault-Team, ENGLISH: scroll to down da die Eigenschaftskonformität und somit auch die dauernd nötige Synchronisation von Properties die Vault-User (Kunden) verwirrt, wäre es ideal die Property-Synchronisation automatisiert am Server durchzuführen. Bei Statuswechseln, beziehungsweise auch bei Mappings zwischen Vault-Properties und IProperties im Inventor (Vault "Revision" soll gemappt und im Inventor Schriftkopf aktuell dargestellt werden) ist eine manuelle Synchronisation der Properties erforderlich (Rufezeichnen und Freigabe nicht möglich). Außerdem ist dieser Schritt nötig um den aktuellen Wert des Properties zu überschreiben. Dies bezieht sich vor allem auf Systemproeprties wie "Revision" und "Status (Historisch)". VIele User wollen die recht umständliche Revisionstabelle von Vault nicht nutzen. Ihnen reicht oft auch nur die aktuelle Revision und der aktuelle Status am Schriftkopf der Zeichnungsableitung. "Revision"--> customiced Iproperty --> then the property is displayed in the drawing head "Status (Historical)" --> customiced Iproperty --> then the property is displayed in the drawing head etc. Jobserver-Synchronisation beim Statuswechsel: Mir ist sehr wohl bekannt, dass auch beim Statuswechsel zum Beispiel die Properties am JObserver automatisch synchronisiert werden können. Hierbei folgende Probleme/Einschränkdungen und Fragen vom Kunden: - Der Job ist sehr fehleranfällig - bei kundenspezifischen Jobs muss dieser job immer priorisiert vorangesetzt werden und überfüllt die JobQue. Nebenbei kommt hier auch noch jeweils ein eigener Job für die Aktualisierung der Reisionstabelle hinzu. - Der Kunde wir bis zur Abarbeitung weiter verwirrt. Auch nach intensiven Schulungseinheiten dauert es meist recht lange, bis die User den Ablauf intus haben und den Property Sync wirklich aktiv vor jeder Aktion durchführen, die diesen voraussetzt. - der Kunde versteht nicht, dass das Data Management Produkt Autodesk Vault solche Aktivitäten nicht automatisiert am Server durchführen kann. - Im Prinzip ist eine Vault-Umgebung ohne Jobserver somit eigentlich gar nicht lauffähig! Das ist ein Problem! Nicht jeder Kunde kann/will sich - Der Property Sync über den Jobserver wird nicht sofort ausgeführt, der User muss warten! - Vor einem Statuswechsel muss der Property-Sync immer Manuell durchgeführt werden, wenn ein Kriterium eingebunden ist. zusätzliche 3 Lizenzen für einen separaten Jobserver leisten (1xCollection/Suite, 1x Vault, 1x Windows lic). Bei Kleinkunden die Vault nutzen (1-10Lizenzen) ist solch eine Investition nicht selbstverständlich! Lösungsvorschlag: Da auch bei der Änderung von benutzerdefinierten Properties (Property-Grid) die Aktualisierung automatisiert am Client stattfindet, sollte das ja auch zum Beispiel bei Statuswechseln möglich sein!? Alle anderen, die dann immer noch nicht synchronisiert/komform sind, sollten meiner/unserer Meinung nach automatisiert am Server aktualisiert werden. Zum Beispiel durch eine regelmäßige Abfrage nach "Nicht konformen Eigenschaften" und einer Server Aufgabe. Auch bei einer Änderung eines Properties wird hier zum Beispiel auf Grund des Property Mappings die Eigenschaft "Status (Historisch)" und die Eigenschaft "Revision" automatisch in die Inventor Datei synchronisiert. Wäre es hier nicht auch beim Statuswechsel möglich, dass nach dem Statuswechsel ein Event angestoßen wird, über den die Properties, die sich beim Statuswechsel änern, in die Datei synchronisiert werden. Somit würde der Zustand der "Nicht konformen Eigenschaftskonformität" gar nicth zustande kommen. ENGLISH: pictures and screenshots you can find above! Here the description in English. Idea: The Vault property sync function should work witout a jobserver and without manuel interaction of the vault-user/CAD-user Our customers often are not using the Autodesk Vault revision table, because the function is to complex and uses to much time. Instead of the revisoin table customers are often using a Property mapping of following properties form Vault --> Inventor IProperty "Revision"--> customiced Iproperty --> then the property is displayed in the drawing head "Status (Historical)" --> customiced Iproperty --> then the property is displayed in the drawing head etc. Problem: Such system based properties like the Status are not synchronised with the files in the filestore like user-defined-properties of Vault. When the user is performing a change of status in Vualt always a the flag of Property-compliance is displayed. Most users don't know (even not after a Vault training) why this is happening and why he/she must manually initiate the property sync. The customers think that the Vault Server or the Vault CLient should manually perform this interaction when a property incompliance ist displayed or user changes a state. Jobserver-Property-Sync: Of course I konw that it ist possible to use Autodesk Vault jobserver for such interactions. I konow the possibility to synchronice properties after a change of state. disadvantage: Every PDM Vault environment needs a own Jobserver. For small customers with 1-10 seats is this a heavy investment because the customer needs 3 new licences (1x Collection/Suite, 1x Vault, 1x Windows) In the jobque are a lot of jobs wich have to be handled for the revision table another job is produced beofore a change of state the user always has to perform a manuall Prop Sync when a criteria is set in the lifecycle of the object. Otherwise he is not able to change state. Why is it not possible to perform the Property sync automatically by a event after the change of state? See example: When a userdefined property is changed via property grid the property and also the sytem properties Revision etc are synchronized with Inventor Apprentice. In this case it is how it should be. Solution: An own event which starts the property sync after a change of state and a server task which checks if there are documents with an incompliance of properties. In this case the server should start the synchronisation of properties. Danke für das Interesse an meiner Idee! Thanks for reading! Schöne Grüße Regards Dominik
Show More