Hi there.
I'm very new to Showcase, and I love it so far! But my roof material is slightly rotated and I can't figure out why.
Material rotation is 135 (which is what I want) and the perfectly square house is exactly oriented to North. What gives?
See how the tile edge is different at the edge of my roof?
How come?
Rendered in AutoCAD before:
See? Roof pattern matches roof edge.
Thanks. 🙂
I could attach the DWG file, but not the Showcase a3s file even after changing the file extension to something else. Sorry.
Actually, those documents DID get attached. Change the .doc to a .a3s for a Showcase 3D scene file, and change the .txt to a .apf for an Autodesk Packet File.
No matter what I try, I can't post the AutoCAD 2014 dwg file! The other way around. Weird. Sorry.
Zipping? DUH!
Zip file attached. Thanks for the tip!
HI,
I tried to unzip the file you sent but I can't open it in Showcase.. The companion file is empty.. therefore the Showcase project is empty.. That is very commun mistake when new to Showcase. To share your project with co-workers here is the process.
Open your Showcase project
Go to File> Save scene and texture as
This will open the save window. In this window, choose .zip as the output file format.
Then.. send the project to your co-worker.
If you do to and re-attach the .zip file to a reply post, I will be able to look at it and see if I can help you out.
Thanks
Marion
Thanks for the help on properly zipping & saving. I did what you asked, but the file is over 133+ megs and won't upload. I'm an avid purger, so I'm not sure what I can do in Showcase to reduce the file size. Is there any "purge-like" function in Showcase?
No you can't purged anything. You need to send the file as his.
You can zip the AutoCAD file maybe? I can do the import on my side.
Marion
Here's the DWG file of the little house.
HI,
I have loaded the house in Showcase and did not experience the rotation you had.
Two things are possible.
1- You did not import the house within the correct scalling (mine was imported in Inches) You can review and change the unit in the Import Status window- Refer to the first image
2-Without noticing, under the material properties you might have slighly rotated the image? Refer to image 2
I suggest you re-import the house and see if you encounter the same problems. Or, adjust the rotation of the texture image under the material properties.
Let me know if that helps
Marion
Thanks for your help. Turns out I just re-imported it and it looks fine now. Maybe something was wrong on my first try. It's all good! 🙂
Can't find what you're looking for? Ask the community or share your knowledge.