Hy heverybody.
I have a LITTLE error setting a positional keyframe on a particular object.
When i move the object along his axys everithing is ok, but after the first rotation the position registrered in new keyframes automatically change.
in some scene the movement is very little, but in other scene the part ran out of the scene....
I have prepared a litthe sample scene for testing this issue. In the zip there is a txt file with the sequence of operation to test.
in the following 2 images you can see how the position changes (in the transform properties panel) only adding a new keyframe (without moving the object)
Thanks in advance.
Christian Garimberti
Technical Manager and Visualization Enthusiast
Qs Informatica S.r.l. | Qs Infor S.r.l. | My Website
Facebook | Instagram | Youtube | LinkedIn
Solved! Go to Solution.
Solved by Christian_Garimberti. Go to Solution.
Solved by admaiora. Go to Solution.
Solved by Christian_Garimberti. Go to Solution.
The scene was made in 2015.
In the zip file (not a showcase zip...) there are 4 images that show the problem.
There is also the ipt file (inventor 2015......) imported in the scene.
Theese are the 2 images of the first post:
Between the two steps, there is only the ADD KEYFRAME command. no movemet or position changes.
Thanks.
Bye
Christian Garimberti
Technical Manager and Visualization Enthusiast
Qs Informatica S.r.l. | Qs Infor S.r.l. | My Website
Facebook | Instagram | Youtube | LinkedIn
Ciao Christian,
this "movement" happens when the pivot is change from is initial an natural position (with Insert, for example).
You can restore it and it should fix it.
-video available in 64 min-
Admaiora
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Thank You Admaiora!
You solved my big problem.
Sometimes the esaiest is the best... restoring the pivot was my last thought.... I never changed the pivot on this object. It was only imported from inventor.
The other strange thing is that in my big scene i had to do this:
1. click on MOVE TO NATURAL PIVOT (the pivot ran away from the scene...)
2. click on CENTER PIVOT (the pivot came back to the object)
3. click again on MOVE TO NATURAL PIVOT (the pivot stay in the center of the object)
the strange is that the coordinates of the pivot before and after the reset are the same.... (see the images...)
Then everithing work fine.
Thank You very much.
Christian Garimberti
Technical Manager and Visualization Enthusiast
Qs Informatica S.r.l. | Qs Infor S.r.l. | My Website
Facebook | Instagram | Youtube | LinkedIn
Thankss for the help!
Been encountering the same problem just now 🙂
Kind regards
Daniel
Can't find what you're looking for? Ask the community or share your knowledge.