Cannot Mount Stone+Wire Autodesk Smoke 2010

[trackmasterz]

Hello,

I have just reinstalled the Autodesk OS for Linux from the given DVD. Everything went successfully but now after installing Smoke 2010 on linux i cannot seem to mount the STONE+WIRE.

I have tried everything possible.

The ID under sw_storage.cfg and sw_framestore_map match exactly.
The /etc/hosts file hostname and the sw_framestore_map HADDR also match. (Given ip 192.168.10.25)
Everything seems to be in order.

I also cannot find /usr/discreet/sw/swdbd

It says no such file or directory.

OUTPUT FOR ALL AS BELOW


Stopping Stone+Wire ... Stopping WireTap Server...
Wiretap Server not running.
Unable to connect to database server on host 'localhost' port 7261: Connection refused.
S+W Database server is not running.
Stone+Wire Probe daemon stopped.
Using config file '/usr/discreet/sw/cfg/sw_bwmgr.cfg'.
S+W Bandwidth Manager server not running.
Output log to: '/usr/discreet/sw/log/sw_unmount.log'.
terminate called after throwing an instance of 'CoException'
what(): Network is unreachable.
/etc/init.d/stone+wire: line 69: 12100 Aborted $SW/sw_probed --Shutdown >/dev/null
done

Starting Stone+Wire ...
Mounting Stone+Wire Filesystem...
Output log to: '/usr/discreet/sw/log/sw_mount.log'.
Mounted Stone filesystem successfully.
Starting Stone+Wire Probe Daemon...
FATAL: error starting sw_probed check /usr/discreet/sw/log/sw_probed.log

cat /usr/discreet/sw/log/sw_probed.log

0 CoMsgLogger.cpp:138 05/07/12:20:52:31.606 Output log to: '/usr/discreet/sw/log/sw_probed.log'.
# Discreet sw_probed log file - 1.0
# Started - (IST) Mon May 7 20:52:31 2012
# Hostname - smoke5
1074792800 CoThreadPthread.C:198 05/07/12:20:52:31.606 Registered thread 'Logger'
2510994272 SWFramestoreProbe.C:761 05/07/12:20:52:31.615 Unable to broadcast server information on multicast port: No such device.
2510994272 sw_probed.C:153 05/07/12:20:52:31.615 Unable to start S+W framestore map services: No such device..
1075845472 CoThreadPthread.C:198 05/07/12:20:52:31.615 Registered thread 'S+W Remote Lock manager'
1075845472 CoRemoteLockServer.C:243 05/07/12:20:52:31.615 Remote lock server started


/etc/hosts

# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost

192.168.10.25 smoke5
1.53.1.102 SMOKE-SAN
192.168.10.24 LUSTRE

/usr/discreet/sw/cfg/sw_storage



# Framestore Unique Identifier
#
# Identify the framestore on the Wire network. This number must be different
# for any workstation on the same Wire network. Valid number are 1 thru 1023.
#
# This value is overwritten each time a StoneFS partition is sucessfully
# mounted and must be manually defined for StandardFS only configuration.
#
# This value has precedence over the ID defined in the sw_framestore_map
# configuration file.
#
ID=25

/usr/discreet/sw/cfg/sw_framestore_map

#
# Discreet Logic
#
# sw_framestore_map sample file
#
# Notes: * Comments begin with (#) pound signs.
# * Version token is mandatory
# * Current valid protocol tokens are TCP, HIPPI
#
# Please refer to the sw_framestore_map man page for complete
# details.
#
VERSION = 2.0



FRAMESTORE=smoke5 HADDR=192.168.10.25 ID=25
#FRAMESTORE=SMOKE-SAN HADDR=1.53.1.102 ID=102
#FRAMESTORE=SMOKE1 HADDR=192.168.10.21 ID=21
#FRAMESTORE=FLAME HADDR=192.168.10.22 ID=22
#FRAMESTORE=SMOKE2 HADDR=192.168.10.20 ID=20




KINDLY HELP

THANKS

[Robert.Adam]

Hi

Does the workstation's network interface actually work? Try pinging another system on the network.
Make sure the network cable is connected to the proper port on the back (preferably eth0).

Can you please post the contents of the /etc/sysconfig/network-scripts/ifcfg-eth0 file?

Regards,
Robert.

[trackmasterz]

Hello Robert,

Thanks for your support. I realized i had an old backup of the sysconfig folder which i replaced and things fell in place.

Everything works fine now. Thanks again.

Regards
Ankit

[Robert.Adam]

My pleasure.
Glad it works now!

Robert.