Freewheel (Read Only)
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Problem in rendering

1 REPLY 1
Reply
Message 1 of 2
giordandue
1779 Views, 1 Reply

Problem in rendering

Hi,

after have worked by ADR12 on a pdf drawing (derived from dwg), I would save it (as dwfx file) in Freewheel.

Nevertheless, only my over-imposed corrections appear on the web page (http://freewheel.labs.autodesk.com/......), while the original drawing is missed. Any suggestion?

Incidentally, I use a pdf file because I met problems in opening directly dwg in ADR by DwgTrueView (see discussion opened with ADR group).. How many problems!

Thank you

1 REPLY 1
Message 2 of 2
scott.sheppard
in reply to: giordandue

If you export a DWF and mark that up with ADR, you should be able to load the DWF into Freewheel. You should resolve the publishing issue so it lets you skip the PDF part.



Scott Sheppard
Program Manager
Autodesk Labs
Autodesk, Inc.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report