Freewheel

Reply
VB1
New Member
VB1
Posts: 1
Registered: ‎12-13-2010
Message 1 of 5 (1,613 Views)

Next section

1613 Views, 4 Replies
12-13-2010 07:53 AM

I would like to view the large of number dwf files. How to do? Example http://aviationdesigntech.com/3DGallery/tabid/55/Default.aspx

 

Board Manager
scott.sheppard
Posts: 1,108
Registered: ‎11-13-2006
Message 2 of 5 (1,596 Views)

Re: Next section

12-14-2010 09:53 AM in reply to: VB1

Wow - nice aircraft seat - much nicer than what I normally sit in.

 

1. Place each file on a web accessible location.

 

2. Provide one hyperlink per file that the user can click on.

 

3. Set up a web page that loads the file into Freewheel using the URL to its web location.



Scott Sheppard
Program Manager
Autodesk Labs
Autodesk, Inc.
Valued Contributor
ToddHarris7556
Posts: 80
Registered: ‎11-01-2006
Message 3 of 5 (1,361 Views)

Re: Next section

03-31-2011 09:44 AM in reply to: scott.sheppard

I'd also like to be able to do this. If I'm understanding the OP correctly, the question is really how to create multi-sheet DWF files.

I see mention of being able to combine DWFs in Design Review, but can't find where to do it.

The aircraft example supplied by the OP appears to show multiple sections in a single DWF. I don't know if the proper term is 'section' or 'page' or 'sheet' or what, but I've tried using Design Reps and LOD's in an assembly, but all my DWF's show 'Section 1/1'

 

Am I missing something? How did the airplane creator get multiple sections in the DWF?

Many thanks in advance.

Todd

 

PS - I do understand the ability to create seperate hyperlinks to view seperate files.... just trying to understand the DWF format.

Todd

Product Design Suite Ultimate 2012 / Subscription
Win 7/64
Dell Precision 670 / 8GB NVIDIA Quadro FX4500
Dell Precision M90 / 4GB NVIDIA Quadro MX2500
Board Manager
scott.sheppard
Posts: 1,108
Registered: ‎11-13-2006
Message 4 of 5 (1,354 Views)

Re: Next section

04-01-2011 06:38 AM in reply to: VB1

You can drag and drop sheets from one DWF to another.



Scott Sheppard
Program Manager
Autodesk Labs
Autodesk, Inc.
Valued Contributor
ToddHarris7556
Posts: 80
Registered: ‎11-01-2006
Message 5 of 5 (1,347 Views)

Re: Next section

04-03-2011 03:34 PM in reply to: VB1

Thanks, Scott. I did eventually dig that up, but it wasn't easily found.

Todd

Product Design Suite Ultimate 2012 / Subscription
Win 7/64
Dell Precision 670 / 8GB NVIDIA Quadro FX4500
Dell Precision M90 / 4GB NVIDIA Quadro MX2500
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.