Freewheel

Reply
Contributor
wagi2
Posts: 24
Registered: ‎09-16-2003
Message 1 of 2 (193 Views)

DWF are not visible in Freewheel

193 Views, 1 Replies
05-15-2007 12:29 PM
Hi!

my "Spongebob" modelled in Inventor 11 and published with Inventor 2008 is not visible after opening it in freewheel. In Design Review the DWF files works fine.
here is the File
http://blog.inventor-faq.de/dateien/spongebob.dwf

Thankyou for your help!

Juergen
*Scott Sheppard - Autodesk
Message 2 of 2 (193 Views)

Re: DWF are not visible in Freewheel

05-16-2007 05:07 AM in reply to: wagi2
Thanks for mentioning this. Project Freewheel (http://dwfit.com) mentions
this:

Password protected, and DRM (measure-disabled and print-disabled) DWF files
are not currently supported.

This was inadvertently left off of Autodesk Freewheel
(http://freewheel.autodesk.com). I will pass this on to the marketing team.

wrote in message news:5586903@discussion.autodesk.com...
Hi!

my "Spongebob" modelled in Inventor 11 and published with Inventor 2008 is
not visible after opening it in freewheel. In Design Review the DWF files
works fine.
here is the File
http://blog.inventor-faq.de/dateien/spongebob.dwf

Thankyou for your help!

Juergen
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.