Freewheel

Reply
Active Member
tilehaus
Posts: 8
Registered: ‎05-13-2007
Message 1 of 4 (873 Views)

Digital Rights Error

873 Views, 3 Replies
02-02-2010 06:27 AM
I have been successfully using Freewheel embedded in a blog for some time, but I am now getting an error when I publish and upload new drawings - "the requested DWF file has been protected with digital rights management. At this time Freewheel does not support DRM protected DWF files."

I do not understand where DRM is set in the Inventor 2009 application I used to publish these files. Please let me know what I might be doing wrong.

I have attached an assembly drawing that appears to be protected in this way.

Keith
*Scott Sheppard - Autodesk
Message 2 of 4 (873 Views)

Re: Digital Rights Error

02-02-2010 10:40 AM in reply to: tilehaus
Digital Rights Management properties are set when a DWF is published that
does not allow measurement, markup, or printing. I believe your Inventor is
publishing a DWF that cannot be measured. As part of your publishing
properties, if you have disable measurement checked, you will want to
uncheck that.

wrote in message news:6328640@discussion.autodesk.com...
I have been successfully using Freewheel embedded in a blog for some time,
but I am now getting an error when I publish and upload new drawings - "the
requested DWF file has been protected with digital rights management. At
this time Freewheel does not support DRM protected DWF files."

I do not understand where DRM is set in the Inventor 2009 application I used
to publish these files. Please let me know what I might be doing wrong.

I have attached an assembly drawing that appears to be protected in this
way.

Keith
Active Member
tilehaus
Posts: 8
Registered: ‎05-13-2007
Message 3 of 4 (873 Views)

Re: Digital Rights Error

02-02-2010 09:16 PM in reply to: tilehaus
Nope, that wasn't it. But I did change the published format to dwfx and that displayed fine.

Maybe something has changed on the Freewheel service?
*Scott Sheppard - Autodesk
Message 4 of 4 (873 Views)

Re: Digital Rights Error

02-03-2010 11:29 AM in reply to: tilehaus
Now that I would know about. I am one of the guys who updates the Freewheel
server. Since the XPS format does not allow for digital rights management,
whatever setting you have in Inventor is ignored when you publish a DWFx and
you just get a plain old DWFx file (contents are XPS).

wrote in message news:6329169@discussion.autodesk.com...
Nope, that wasn't it. But I did change the published format to dwfx and
that displayed fine.

Maybe something has changed on the Freewheel service?
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!