Community Search
Didn't find what you're looking for?
Ask the community.
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
12 results
Sorted by:
I started getting an error dialogue box that states "Unexpected error; quitting". It happens when I create a new study (right after the analysis type box closes), after I generate the mesh (the...
I've been asked whether the CFD software can analyze mixing efficiency of electrolyte undergoing a flow-mixing approach while it's being charged. The physical properties of the electrolyte chan...
I've been trying to run a simple static thermal study. Even with 25X the heat generation applied as boundary conditions, I'm getting no thermal change. I've gone back through tutorials an...
I modeled a simplified version of a PCBA we're already testing in the lab. With ambient conditions at 26C and a power input of 5.4W with a 100% duty cycle, the thermal image indicates a chip te...
I set this up based on the tutorial at the link below. There doesn't seem to be much heat conduction to the heat sink. I've changed the LED material type (from PCBA) and there was no chan...
Presently, I don't have the Sim CFD plug-in activated on Solidworks. So, I export an x_t parasolid out of Solidworks, import that into Sim CFD, and go from there. Trouble is, any geometry...
I ran a large thermal study (had to run overnight). I viewed the results this morning, saved it, then saved the study as I exited the software, and now when I open up the .cfd file, there are n...
I duplicated an assembly our client has and has tested. Their processor is using 5W. Their ambient temp is 25C. They instrumented several areas including the heat sink on the proces...
I've (supposedly) been having good mesh in the software, as I haven't seen errors and the analysis runs and completes. However, today I displayed the mesh, and I noticed some lines that don't h...
I'm using a resistive surface to represent a condenser coil (with fins...I used the Autodesk CFD suggested calculations to arrive at the resistance by area numbers). My flow rate of my fan is a...