Community Search
Didn't find what you're looking for?
Ask the community.
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
51 results
Sorted by:
Here is my situation: 38.0" OD x 1.0" WT length of pipe. Centered inside it at one end is a 26.0" OD x 1.0" WT length pipe that bent along a 130 ft. bend radius. See attached file which illustrate...
I know this has been discussed in other threads but...Why is the YZ origin plane oriented this way by default? Having the plane oriented this way results in horizontal sketch geometry being ver...
See attached pic. Why can't I do a simple multiplication parameter?
Hey again guys, So I fussed about and managed to get my head around the very basic idea of having 3 tubes intersecting. I'm sure my method to get my angles that I wanted in 3D interface migh...
HI, I'm new to Inventor, but familiar with some other parametric modeling apps (FreeCAD). I'm trying to design an inside spur gear inside of an outside spur gear. The application is a ...
I have options for size on size threadolets and reducing threadolets. The problem is that what we buy and use are not designed like either of these options. I will use 2" for example. Size on size gi...
Hello, My apologies if this has been covered elsewhere. I've searched, but am new enough to the CAD vocabulary that I might not be searching the correct terms. I have a part t...
Hi
I am new to Inventor and have some trouble with creating an internal gear.
https://forums.autodesk.com/t5/inventor-forum/internal-bevel-gears/td-p/5954862
This post helped me a lot with my w...
I have a .idw that is 8-1/2" x 11" and need to change it to D or E size sheet. Is there a way to do this once the drawing has already been saved?
Might not be in over my head, but certainly up to the eyeballs.... Having "successfully" made a custom content center library and published some iParts thereto, I find that other projects ca...