Community Search
Didn't find what you're looking for?
Ask the community.
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
11 results
Sorted by:
Hi again, I have an assambly with a few parts. In a FEA analysis I get a high stress value between two faces of two parts that are perpendicular. See figure below.  ...
HI, I have an assembly with mirrorred parts. When I change the original part, the mirror parts are not updated. I have to remove the mirrored parts and create the mirror feature again...
Hi all, I often want to copy a design (assembly plus used parts) to some other folder as a quick start for some derived work. I want to be able to work on this copy without influencin...
Hi, I'm not sure how to model this (see picture below). the problem is that I do not know how to place all those little bars inbetween the long big ones. Especially such that the little ba...
Hi, I'm getting some strange results from my FEA. I reduced the issue to a very simple case: A block metal of 100x100x50 mm. A 10000N force is applied in the middle of the ...
Hi I need to do a lot of simulation (FEA) for a machine I want to build. I start with the steel construction of the machine. I have the problem that the simulation very often fails (just a...
Hi I have a design with FEA analysis. When I run the simulation and the computer is calculating the mesh, it suddenly stops and the simulation window dissapears. When running the simulation ...
Hi I have a completely symetrical design with a symetrical load. But the resulting stress is very asymetrical. I understand that there may be some differences because of computation roundin...
Hi I have a simple part which is a long U shape (200x30 mm, 4 mm thick, 7m long). When I start a FEA analysis the edges become pointy. (one very sharp edge instead of two edges of 90 degree...
Hi again, I am simulating a 5 parts assembly. When running the FEA analysis, it comes with a result but all stresses and displacement values are zero! What am I doing wrong? I attach...