Community Search
Didn't find what you're looking for?
Ask the community.
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
5 results
Sorted by:
i am trying to design a shaft with a cut out that would cut along the shaft a a set angle and wrap around the shaft. I am going to have a bearing ride along the cut out and cover this to a l...
Very new to inventor 2012 coming form solid edge way back in the day (1998 to 2008) to autocad 2d. getting ready to move to the inventor and trying to figure out some things. searched vid...
Show results in replies (3)
-
You might also look into Derived Components techniques. Attach example problem here if possible.
-
Multi-body technique would be my preference for this example, but you might also search on 'Adaptiv...
-
Option #1 - Make the whole thing a multibody part. Put the hole in the part file, and derive the pa...
using inventor 2013, design stamping dies and use the basic materials of D-2/A-2/ 4140, CRS 1018 o-1 etc. is there a place to download the properties or to find a liberary of these typ...
I put in 3 seperate hole tables in a drawing, labeld one counter bore holes, one dowel hles and one jack screws. used the selection hole method and all the tags were the same starting with A1 ....
inventor 2013- I have to build a tool which I use all english but the base part the tool is making is in a iges file that is when I load is metric. Is there a way to convert this or...