FMDesktop (Read Only)
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Deleting drawings out of Facility Manager

1 REPLY 1
Reply
Message 1 of 2
tom
Explorer
360 Views, 1 Reply

Deleting drawings out of Facility Manager

I have been working on putting a few of my own drawings into FM Desktop and have had good success. There are 2 drawings, however, that seem to have become corrupted and cause Facility Manager to lock up. I tried removing the dwf files out of the project directory, but this did not resolve the issue. How can I remove unwanted drawings from Facility Manager?

Thanks!
1 REPLY 1
Message 2 of 2
mark.evans
in reply to: tom

There is not a method to delete only the drawing. There are two approaches to solving this.

One, you can delete the floor. On the main page, click on the Facilities menu on the left. Then click on the Floors menu. This will launch a dialog to browse the floor records. Find the floor with the bad drawing and delete that floor record. It will take the drawing with it.

Second approach, import a new drawing to the same floor. It will overwrite the prior drawing for that floor.

If you still have drawing lock-ups with DWF files that open in the plain DWF Viewer, log a support case for some one-on-one debugging.

Mark Evans
Autodesk


Mark Evans
Senior Product Manager
AEC Division, Simulation Product Line
Autodesk, Inc.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report