FM

Reply
Contributor
autocadguru
Posts: 16
Registered: ‎09-30-2005
Message 1 of 2 (161 Views)

CAD Standards in FM ( UK or USA)

161 Views, 1 Replies
01-16-2006 06:04 AM
I am an AutoCAD consultant, providing coaching and consultancy on AutoCAD in the FM industry. I also work with the FM products, ARCHIBUS/FM and FMDesktop (recently acquired by Autodesk).

Whilst I am aware of the current AEC (UK) CAD standards which have a few layers for FM, does anyone out there know of a specific CAD standard for FM within the Autodesk CAD environment? I know we have standards like BOMA and standard methods of measurement such as the Royal Institute of Chartered Surveyors (RICS) in the UK, but is there a specific CAD standard?

Would appreciate any comments and links (if available).
*melanie stone
Message 2 of 2 (161 Views)

Re: CAD Standards in FM ( UK or USA)

01-16-2006 09:02 AM in reply to: autocadguru
I've never seen anything, myself...

wrote in message news:5059927@discussion.autodesk.com...
I am an AutoCAD consultant, providing coaching and consultancy on AutoCAD in
the FM industry. I also work with the FM products, ARCHIBUS/FM and FMDesktop
(recently acquired by Autodesk).

Whilst I am aware of the current AEC (UK) CAD standards which have a few
layers for FM, does anyone out there know of a specific CAD standard for FM
within the Autodesk CAD environment? I know we have standards like BOMA and
standard methods of measurement such as the Royal Institute of Chartered
Surveyors (RICS) in the UK, but is there a specific CAD standard?

Would appreciate any comments and links (if available).
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.