Factory Design Suite General Discussion

Factory Design Suite General Discussion

Reply
Active Contributor
CadlineSupport
Posts: 48
Registered: ‎02-23-2012
Message 1 of 3 (279 Views)
Accepted Solution

Send to Inventor Button - iLogic Rules and Forms Omitted

279 Views, 2 Replies
03-08-2012 08:21 AM

When using the 'Send to Inventor' button in AutoCAD Architecture, the iLogic rules in my Factory Layout template are not brought in to the new Layout created. I have selected the desired template in the Templates tab of the Inventor factory options, is there another location that I need to specify the template to be used? All the iLogic is brought in as expected when creating a new Factory Layout from template as normal from Inventor so this seems to be a problem with the 'Send to Inventor' button itself. Can anyone advise?

Hi,

 

Supposed you are using the Win 7 OS.So there is two templates for Metric and Imperial in the C:\Users\Public\Documents\Autodesk\Inventor 2012\Templates\Factory. You need to create the ilogic rule in them. So if you new 2D layout in ACAD by Metric template, then Send to Inventor will select the 3D metric template too. Vice versa.

 

Thanks,

-Xuesong

Employee
XuesongBai
Posts: 431
Registered: ‎03-15-2009
Message 2 of 3 (275 Views)

Re: Send to Inventor Button - iLogic Rules and Forms Omitted

03-08-2012 05:57 PM in reply to: CadlineSupport

Hi,

 

Supposed you are using the Win 7 OS.So there is two templates for Metric and Imperial in the C:\Users\Public\Documents\Autodesk\Inventor 2012\Templates\Factory. You need to create the ilogic rule in them. So if you new 2D layout in ACAD by Metric template, then Send to Inventor will select the 3D metric template too. Vice versa.

 

Thanks,

-Xuesong

Active Contributor
CadlineSupport
Posts: 48
Registered: ‎02-23-2012
Message 3 of 3 (270 Views)

Re: Send to Inventor Button - iLogic Rules and Forms Omitted

03-09-2012 01:15 AM in reply to: XuesongBai

Superb! Thank you very much for your help Xuesong.

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.