Factory Design Utilities Forum
Welcome to Autodesk’s Factory Design Utilities Forums. Share your knowledge, ask questions, and explore popular Factory Design Utilities topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

partnumber in text on part

10 REPLIES 10
SOLVED
Reply
Message 1 of 11
j.vanderheijden
652 Views, 10 Replies

partnumber in text on part

I have made a part  with iLogic so the part number comes on the part with text.
If I sync the part now  with acad  the text is not visible.
Is there a possibility that the text will be visible?
Perhaps I have to place text in a different way.

Mvg Jos

Your drawings are only as good as the symbols that complete them...
10 REPLIES 10
Message 2 of 11

Hi Jos,

 

Why not create a feature based on the text? I create Emboss feature based on Text sketch, so that the text will be projected on the 2d DWG and then  visible in ACAD?

 


Thanks,

-Xuesong

Please mark as a solution if somehow I got it right.
Message 3 of 11

Hi Xuesong.

i didn't no that you have to create a feature to make the text visible.

Thanks, it works great.

Mvg Jos

Your drawings are only as good as the symbols that complete them...
Message 4 of 11

Is it possible to fill in the numbers with collor so they don't have an open structure?

Mvg Jos

Your drawings are only as good as the symbols that complete them...
Message 5 of 11

Hi Jos,

 

I didn't understand what you mean. Do you mean show the color of the text in Invnetor?

 

Thanks,

-Xuesong

Please mark as a solution if somehow I got it right.
Message 6 of 11

Look for the picture, i want it as the text on the top.

Mvg Jos

Your drawings are only as good as the symbols that complete them...
Message 7 of 11

Hi Jos,

 

I understand you.

Unfortunately,it is the limitation of Inventor. The contour of the feature will be only projected.

 

Thanks,

-Xuesong

Please mark as a solution if somehow I got it right.
Message 8 of 11

As in the picture i sync the part to acad and placed the text in acad.

Would it be possible to link the text in acad to the emboss text?

Then in inventor make the emboss text invissible and only see the acad text.

Maybe with some ilogic!!

Mvg Jos

Your drawings are only as good as the symbols that complete them...
Message 9 of 11

Hi Jos,

 

I have an idea. we can export the number to excel by iLogic in Inventor. And then link the excel data in ACAD by Insert table function. So any data change will be updated in Excel and afterwards updated in ACAD.

 

The attached is the result. There is border around the number, but I don't know how to clear it.

Please mark as a solution if somehow I got it right.
Message 10 of 11

I will try.

That ilogic code is that standard  in ilogic with a standard snippet?

Can you give me a hint.Smiley Wink

Mvg Jos

Your drawings are only as good as the symbols that complete them...
Message 11 of 11

Hi Jos,

 

Maybe we should use the csv file.  So the iLogic is in my snippet.

Good luck.

 

Thanks,

-Xuesong

 

Please mark as a solution if somehow I got it right.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report