Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
In fabrication every time I select objects to output to a cam file I get the message "the following items will not be output" (see attachment).. and the operation is cancelled... does anyone know why this is happening?
Have you already sent it to CAM? If so, it wont resend the same item to CAM unless you reset the Status back to Design.
______________________________________________ Don't forget to "Accept As Solution" and "Give Kudos" when an acceptable solution has been given. || LinkedIn || LinkedIn Fabrication Group ||
I learn new things about this program almost every day. Keeps you on your toes. Glad I could help!
______________________________________________ Don't forget to "Accept As Solution" and "Give Kudos" when an acceptable solution has been given. || LinkedIn || LinkedIn Fabrication Group ||
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")