Ecotect Analysis Forum (Read Only)
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

UNIFORM RESULTS OF DAYLIGHTING FOR THE WHOLE ROOM

1 REPLY 1
Reply
Message 1 of 2
cabalakornelia
358 Views, 1 Reply

UNIFORM RESULTS OF DAYLIGHTING FOR THE WHOLE ROOM

What did I wrong, why the is no significant difference in distribution of lux values through the interior, but the whole room has the same value of lux and the color is constant yellow? Please give me some advice, I attached the visualisation of my results

1 REPLY 1
Message 2 of 2
Pennetier1
in reply to: cabalakornelia

Hi Cabalakornelia, 

 

It appears that your scale needs to be re-adjusted.  There is a option in the Analysis Grid control panel (the little arrow by the Contours entry box) to fit your scale to your calculated values and I am suspecting that is your issue.

 

scale.jpg

 

Try it and see if that works.  If it doesnt work...

 

Double check that you have indeed a roof on your zones.  I am sure you do, or else you would still have some variations.

Did you use the Daylight Factor calculations or was this sent to Radiance and brought back to Ecotect?

 

Let me know if you have more questions on this topic, otherwise please accept as a solution so that others can benefit from this information.

Cheers,

Olivier A. PENNETIER

SYMPHYSIS

www.symphysis.net

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report