Ecotect Analysis Forum (Read Only)
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Thermal Analysis of Open Areas

0 REPLIES 0
Reply
Message 1 of 1
atinjain2010
1023 Views, 0 Replies

Thermal Analysis of Open Areas

Hello!

 

I am modelling creeper draped walls on the sides of a road and wish to study the temperature variations of Air in this semi enclosed space.

 

Please note:

1. I have defined the space as a zone using a void plane to enclose the region between the walls from the top.

2. The drape and the walls have been considered a part of the zone.

 

I am facing the following difficulties:

1. The temperature in this zone is coming out to be considerably higher(42 degree centigrade) than the expected value(average temperatures never exceed 35 degree centigrade). What could be the reason for this discrepancy. Is this because of the fact that it is an open region and proper enclosing of the zone is not done?

2. To study the temperature variation with distance from the walls, I defined void zones adjacent to the drapes. Ecotect displays an error saying "Zone has zero Volume". What could be the reason for this and solution?

0 REPLIES 0

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report