Help with rotate and stretch

[Anonymous]

If anyone has time, please take a look at the attached drawing. The
problem is detailed inside the drawing file.

This is related to stretching and rotating entities within a block.

TIA.

--
R.K. McSwain
http://rkmcswain.blogspot.com

[Anonymous]

Just include the linear parameter in the rotate action selection set and you should be good to go.

[Anonymous]

I fixed the block for you. I did 3 things for you:
1 - I included the linear parameter in stretch action.
2 - I turn off the grip for the bottom of the linear parameter.
3 - I moved the grips for the rotation parameter so the 10deg tick marks show up on both sides of 90deg.

Good Blockin'
Will DeLoach

[Anonymous]

whdjr said the following on 6/21/2006 12:43 PM:
> I fixed the block for you. I did 3 things for you:
> 1 - I included the linear parameter in stretch action.
> 2 - I turn off the grip for the bottom of the linear parameter.
> 3 - I moved the grips for the rotation parameter so the 10deg tick marks show up on both sides of 90deg.
>
> Good Blockin'
> Will DeLoach

You are the man!

I guess I need to start studying these some more. I think #1 is what was
killing me.

Thanks again.

--
R.K. McSwain
http://rkmcswain.blogspot.com

[Anonymous]

heyhey, R.K.
i eliminated that extra click for you, check it out!

let me know what you think of it.

[Anonymous]

That's pretty sweet cnibbe!

[Anonymous]

cnibbe said the following on 6/22/2006 2:53 PM:
> heyhey, R.K.
> i eliminated that extra click for you, check it out!
>
> let me know what you think of it.

Very nice.

I actually took the concepts learned here and made a more complex
version of this block, and your trick will help even more.

Thanks.

--
R.K. McSwain
http://rkmcswain.blogspot.com