Dynamic Blocks

## Dynamic Blocks

Distinguished Contributor
Posts: 109
Registered: ‎08-29-2012
Message 1 of 8 (296 Views)

# Help with arraying dnamic block

296 Views, 7 Replies
12-14-2012 05:55 AM

I'm using a 2-2D recangles that are 5'x16" and 10'x16" and I am trying to figure out how to array this in one direction, to the left, but have the array on 5' increments. Also, within each rectangle I am needing text to show which size it is.

e.g. If I drag the array to the left more than 10' but less than 15' it will apply 15'.

Thank you.

So there should be a series of 10' pieces with only one 5' piece on the end?

*Expert Elite*
Posts: 8,204
Registered: ‎04-10-2005
Message 2 of 8 (288 Views)

# Re: Help with arraying dnamic block

12-14-2012 07:56 AM in reply to: jarredmonday

Distinguished Contributor
Posts: 109
Registered: ‎08-29-2012
Message 3 of 8 (284 Views)

# Re: Help with arraying dnamic block

12-14-2012 09:09 AM in reply to: jarredmonday

Okay, attached is the best I could come up with, but it is not doing everything I am wanting. The 5' peice should not always be visible the 10' peice should be visible at all times.

The 5' peice should only appear on 10' increments starting at 15'.   e.g. 15,25,35,45,55...etc and not appear on 10' increments starting at  10'.   e.g. 10,20,30,40,50...etc.

*Expert Elite*
Posts: 8,204
Registered: ‎04-10-2005
Message 4 of 8 (282 Views)

# Re: Help with arraying dnamic block

12-14-2012 09:14 AM in reply to: jarredmonday

So there should be a series of 10' pieces with only one 5' piece on the end?

Distinguished Contributor
Posts: 109
Registered: ‎08-29-2012
Message 5 of 8 (277 Views)

# Re: Help with arraying dnamic block

12-14-2012 09:49 AM in reply to: jarredmonday
Yes. I like your description better. Thanks.
*Expert Elite*
Posts: 8,204
Registered: ‎04-10-2005
Message 6 of 8 (273 Views)

# Re: Help with arraying dnamic block

12-14-2012 10:07 AM in reply to: jarredmonday

And the Dyn Blk?

Does it do what you need?

Distinguished Contributor
Posts: 109
Registered: ‎08-29-2012
Message 7 of 8 (270 Views)

# Re: Help with arraying dnamic block

The Dynamic block works great. Thanks a lot. I did, however add to it. I added a visibility set to show and hide the 5' section. Which just fine. See attached.

*Expert Elite*
Posts: 8,204
Registered: ‎04-10-2005
Message 8 of 8 (267 Views)

# Re: Help with arraying dnamic block

12-14-2012 10:32 AM in reply to: jarredmonday

Excellent