DWG TrueView

Reply
Valued Contributor
mlabell
Posts: 50
Registered: ‎01-21-2008
Message 1 of 13 (16,820 Views)

TrueView 2013 deployment

16820 Views, 12 Replies
03-28-2012 12:04 PM

I have downloaded the newest package with Design Review and TrueView 2013.  I am trying to automate the deployment via batch for SCCM packaging for 1400+ computers in 26 offices.  With all previous versions of the apps I have been able to run the dwgviewr.msi files, but for some reason TrueView will not allow it to be installed via the msi and only when running Setup.exe.  Am I missing something with this version?

Mark LaBell, Jr.
Technical Leader
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SSOE Group
www.linkedin.com/in/marklabelljr
Valued Mentor
kevin.barnett
Posts: 392
Registered: ‎08-13-2007
Message 2 of 13 (16,803 Views)

Re: TrueView 2013 deployment

03-28-2012 10:02 PM in reply to: mlabell

what is the url for the combined desgn review and trueview 2013 package?

 

Valued Contributor
mlabell
Posts: 50
Registered: ‎01-21-2008
Message 3 of 13 (16,770 Views)

Re: TrueView 2013 deployment

03-29-2012 04:31 AM in reply to: mlabell

Link to the install.

http://usa.autodesk.com/design-review/download/

 

Also if you download the TrueView only install seperately and try to deploy via the msi the same scenario happens were it requires the Setup.exe to install the application.

Mark LaBell, Jr.
Technical Leader
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SSOE Group
www.linkedin.com/in/marklabelljr
Valued Contributor
tony_72000
Posts: 80
Registered: ‎08-29-2007
Message 4 of 13 (16,767 Views)

Re: TrueView 2013 deployment

03-29-2012 04:38 AM in reply to: mlabell

I'm seeing this as well.



I automatically deployed the MSI file, thinking it would work like the 2012 version and told the GPO to uninstall the previous version first. But when it goes to install the new version, it fails.

 

Now I'm stuffed? :smileyfrustrated:

 

The Design Review MSI works fine.

Valued Contributor
mlabell
Posts: 50
Registered: ‎01-21-2008
Message 5 of 13 (16,765 Views)

Re: TrueView 2013 deployment

03-29-2012 04:44 AM in reply to: tony_72000

Currently I am calling the ADR msi then I use the below syntax to quielty call the setup.exe for TrueView.  Not preferred (since it technically reruns ADR) but it is working in for a few installs that I need to do right away.  The other 1396 installs can hopefully wait for a better solution.


"%~dp0setup.exe" /w /qb /i %~dp0Setup.ini

%~dp0 = the relative path of the file.

Mark LaBell, Jr.
Technical Leader
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SSOE Group
www.linkedin.com/in/marklabelljr
New Member
james.keirstead
Posts: 1
Registered: ‎04-17-2012
Message 6 of 13 (16,074 Views)

Re: TrueView 2013 deployment

04-17-2012 10:33 AM in reply to: mlabell

I have made a Transform file (.MST) available here, and also on my website at http://www.barbarianhamster.com/Services/DontRunSetup.zip

The full gory details of how it came about, and what it does, are available on my blog, http://barbarianhamster.blogspot.com


James Keirstead
http://www.linkedin.com/in/jameskeirstead/
Senior Information Systems Engineer
-----
Perigon International, Inc.
http://www.perigoneng.com
http://www.linkedin.com/company/perigon-international-inc-/

Valued Contributor
skatterbrainz
Posts: 54
Registered: ‎07-21-2010
Message 7 of 13 (15,859 Views)

Re: TrueView 2013 deployment

04-23-2012 08:49 PM in reply to: mlabell

I've been playing around and found the following works so far pretty well...

 

setup.exe /Q /W /I setup.ini

-------------------------
Get the Visual LISP Developer's Bible 2011 Edition, and the AutoCAD Network Administrator's Bible 2012 Edition on Amazon Kindle
Distinguished Contributor
guyh
Posts: 372
Registered: ‎12-11-2007
Message 8 of 13 (15,842 Views)

Re: TrueView 2013 deployment

04-24-2012 03:26 AM in reply to: skatterbrainz

As above. I've just used "%deployment dir%setup.exe" /W /QB /I

AutoCADM 2011 SP2
Inventor Pro 2011 SP2
Valued Contributor
tony_72000
Posts: 80
Registered: ‎08-29-2007
Message 9 of 13 (15,837 Views)

Re: TrueView 2013 deployment

04-24-2012 04:19 AM in reply to: james.keirstead

This works a treat, thanks a lot.

Valued Contributor
mlabell
Posts: 50
Registered: ‎01-21-2008
Message 10 of 13 (15,833 Views)

Re: TrueView 2013 deployment

04-24-2012 04:51 AM in reply to: james.keirstead

Editing the msi did the trick! Deployment ready to roll...

 

echo ***Install PreReqs***

rem Do this first because some uninstalls fail because of a bad install of VCredist 2005

"%~dp0support\VCRedist\2005\vcredist_x86.exe" /q:a /norestart /c:"vcredist_x86.exe /q:a /c:""msiexec /i vcredist.msi /qn /norestart /l*v %temp%\vcredist_x86.log"" "

echo .

"%~dp0support\VCRedist\2008\vcredist_x86.exe" /q:a /norestart /c:"vcredist_x86.exe /q /norestart"

echo .

"%~dp03rdParty\DirectX\DXSETUP.exe" /silent

echo.

 

echo ***Removing 2010 Products***

echo ***Uninstalling ADR***

MsiExec.exe /x {55D9E026-DCB0-46FF-B60A-68B972228CF6} /passive

echo ***Uninstalling TV***

MsiExec.exe /x {5783F2D7-8028-0409-0000-0060B0CE6BBA} /passive

MsiExec.exe /x {5783F2D7-8028-0409-0100-0060B0CE6BBA} /passive

 

echo ***Unistall 2011 Products***

echo ***Uninstalling ADR***

MsiExec.exe /x {8D20B4D7-3422-4099-9332-39F27E617A6F} /passive

echo ***Uninstalling TV***

Msiexec.exe /x {5783F2D7-9028-0409-0000-0060B0CE6BBA} /passive

Msiexec.exe /x {5783F2D7-9028-0409-0100-0060B0CE6BBA} /passive

 

echo ***Unistall 2012 Products***

echo ***Uninstalling ADR***

MsiExec.exe /x {A49BDCBE-590E-43A6-AB77-7C40E499B7C1} /passive echo

***Uninstalling TV***

Msiexec.exe /x {5783F2D7-A028-0409-0000-0060B0CE6BBA} /passive

Msiexec.exe /x {5783F2D7-A028-0409-0100-0060B0CE6BBA} /passive

 

echo ***Unistall ADR Plug-ins***

echo ***Uninstalling ADR DGN plugin***

MsiExec.exe /x {8F7A766B-9E2E-4895-B4B2-958D035F09B9} /passive

echo ***Uninstalling ADR JT plugin***

MsiExec.exe /x {F4C0A7CD-3A4C-4275-9CF1-9CD5136E2FE2} /passive

 

echo ***Install ADR 2013***

"%~dp0x86\ADR\SetupDesignReview2013.msi" /qn /norestart DEFAULTFILETYPE=dwf ADSK_DESKTOPSHORTCUT_1=0 ADR_DONOTSHOWAGAIN=1 ADR_NEXT_INITIAL_CHECK=1 PREFERENCELOCKED=1 HIDE_RESTAB=1

"%~dp0x86\DGN\SetupDesignReviewDGNImporter.msi" /qn /norestart

"%~dp0x86\JT\SetupDesignReviewJTImporter.msi" /qn /norestart

 

echo ***Install TV 2013 x64***

"%~dp0support\VCRedist\2005\vcredist_x64.exe" /q:a /c:"vcredist_x64.exe /q:a /c:""msiexec /i vcredist.msi /qn /norestart /l*v %temp%\vcredist_x64.log"" "

"%~dp0support\VCRedist\2008\vcredist_x64.exe" /q:a /c:"vcredist_x64.exe /q:a /c:""msiexec /i vcredist.msi /qn /norestart /l*v %temp%\vcredist_x64.log"" "

"%~dp0x64\dwgviewr\dwgviewr.msi" /qn ADSK_DESKTOPSHORTCUT_1=0

Mark LaBell, Jr.
Technical Leader
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SSOE Group
www.linkedin.com/in/marklabelljr
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.