DWF

Reply
Distinguished Contributor
davidm_adn
Posts: 209
Registered: ‎11-28-2003
Message 1 of 4 (1,052 Views)
Accepted Solution

Problem with Design Review 2012 and added W2D resource

1052 Views, 3 Replies
04-20-2011 03:34 PM

Hi.

I have an application which adds a w2d resource to an existing dwf.  The w2d contains 1 text object only.  This has worked well for a number of years but now Design Review 2012 is out, and it doesn't show the text object.  It is in there somewhere because the text search facility in DR2012 finds it, so either it can't draw it properly or there is something fundamentally wrong with what I have been doing all this time.

 

Has anyone else experienced this?

 

I have attached a very simple VC8 project which demonstrates the problem.  It expects c:\test.dwf to exist, this file is also in the zip, it just needs to be put in c:\.  It will add a w2d and save a new c:\test1.dwf.  Up to and including Design Review 2011 it looks fine, but not 2012.

 

If anyone has time to have a look and see what they think, I'd be very grateful.

Hi,

 

The text is set transparent in your project. Please set the text color as (0, 0, 255, 255).

Employee
wube
Posts: 106
Registered: ‎06-08-2009
Message 2 of 4 (1,026 Views)

Re: Problem with Design Review 2012 and added W2D resource

04-24-2011 06:38 PM in reply to: davidm_adn

Thank you for your question.

 

I am investigating it. I will reply you once I complete investigation.



Ben Wu
SW Engineer
PSEB-GE-ACRD
Autodesk, Inc.
Employee
wube
Posts: 106
Registered: ‎06-08-2009
Message 3 of 4 (1,026 Views)

Re: Problem with Design Review 2012 and added W2D resource

04-24-2011 07:34 PM in reply to: davidm_adn

Hi,

 

The text is set transparent in your project. Please set the text color as (0, 0, 255, 255).



Ben Wu
SW Engineer
PSEB-GE-ACRD
Autodesk, Inc.
Distinguished Contributor
davidm_adn
Posts: 209
Registered: ‎11-28-2003
Message 4 of 4 (1,020 Views)

Re: Problem with Design Review 2012 and added W2D resource

04-25-2011 04:33 AM in reply to: davidm_adn

Thank you very much for picking that up.  Can I ask, how come it only started going wrong in 2012?  Is transparency a new feature?

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.