DWF

Reply
Active Member
gilpeel
Posts: 6
Registered: ‎10-12-2003
Message 1 of 8 (140 Views)

Fit to page problem when printing DWF

140 Views, 7 Replies
10-08-2003 06:48 AM
Just installed update to viewer the other day. Now if I print a drawing where the page size, say 22x34 is larger than the output paper size, say 11x17, and box checked for "Fit to Page" only the lower left quadrant of the drawing prints in the upper right quadrant of the paper. This worked fine before the upgrade, Any others see this? This does the same on any printer that I have.
*Cochran, Ben
Message 2 of 8 (140 Views)

Re: Fit to page problem when printing DWF

10-09-2003 01:04 AM in reply to: gilpeel
Are you printing the current view of the whole
page?

 

Ben

 



style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">Just
installed update to viewer the other day. Now if I print a drawing where the
page size, say 22x34 is larger than the output paper size, say 11x17, and box
checked for "Fit to Page" only the lower left quadrant of the drawing prints
in the upper right quadrant of the paper. This worked fine before the upgrade,
Any others see this? This does the same on any printer that I
have.
Active Member
gilpeel
Posts: 6
Registered: ‎10-12-2003
Message 3 of 8 (140 Views)

Re:

10-12-2003 03:14 AM in reply to: gilpeel
Printing the whole page. In fact I have uninstalled the viewer and reinstalled the previous version and there is no problem in printing as described.
Regards,
Gil Peel
New Member
CHriS
Posts: 2
Registered: ‎10-12-2003
Message 4 of 8 (140 Views)

Re:

10-12-2003 06:41 PM in reply to: gilpeel
Excuse me! How can I programming DWF format with VBA or LISP?

Thanks.
Contributor
fortnemj
Posts: 14
Registered: ‎11-10-2003
Message 5 of 8 (140 Views)

Re: Fit to page problem when printing DWF

10-20-2003 02:06 AM in reply to: gilpeel
Have you found a solution to this problem?

I have a similar printing problem (prints were fine with Whip, but too small with EV), I bet that a fix for one would yield a fix for the other.
*Mathews, Brian
Message 6 of 8 (140 Views)

Re:

10-22-2003 07:25 AM in reply to: gilpeel
I'm not sure what you are asking for.  The
fact that you mention LISP indicates you are using AutoCAD and are interested in
controlling the printing of DWF files from AutoCAD, is that
correct?

 

Are you trying to create DWF's from AutoCAD using
VBA/LISP?  If so, have you seen the PUBLISH command?

 

Are you trying to create DWF's without
AutoCAD?

 

Are you trying to use VBA/LISP to control the
viewing/printing of DWFs via the Autodesk Express Viewer?

 



style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
Excuse
me! How can I programming DWF format with VBA or LISP?

Thanks.

*Mathews, Brian
Message 7 of 8 (140 Views)

Re:

10-22-2003 07:27 AM in reply to: gilpeel
Can you send Ben Cochran and I a sample DWF that
demonstrates proper printing in the old versions but not in AEV
3.1?

 

Thanks!



style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
Printing
the whole page. In fact I have uninstalled the viewer and reinstalled the
previous version and there is no problem in printing as described.

Regards,
Gil Peel
*Cochran, Ben
Message 8 of 8 (140 Views)

Re:

10-23-2003 12:02 AM in reply to: gilpeel


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

Can you send Ben Cochran and I a sample DWF that
demonstrates proper printing in the old versions but not in AEV
3.1?

 

Thanks!



style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
Printing
the whole page. In fact I have uninstalled the viewer and reinstalled the
previous version and there is no problem in printing as described.

Regards,
Gil Peel
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!