Drafting Techniques

Drafting Techniques

Reply
Active Contributor
jkwilliams
Posts: 29
Registered: ‎01-31-2011
Message 1 of 8 (487 Views)
Accepted Solution

Inserting "MText" Parallel to a Line

487 Views, 7 Replies
09-22-2011 05:52 PM

I need a very simple way of inserting Text Parallel to a Line, but simply selecting an existing line to set the "Angle" of the Text

 

Can any one assist here?

 

Regards,

Jim Williams

Thnaks for those options.

 

The LIsp option looks the best to me.

 

I'll investigate that path.

 

Many thanks for the suggestion.

*Expert Elite*
azrdgldr
Posts: 1,250
Registered: ‎01-09-2007
Message 2 of 8 (483 Views)

Re: Inserting "MText" Parallel to a Line

09-22-2011 08:17 PM in reply to: jkwilliams

Several options to choose from.

1. Type your mtext in.  Start rotate, select mtext object, for base point select one endpoint of line and then the other.

 

2.  Type UCS at the command prompt and hit enter, then type in OB - hit enter, select the line you want the mtext to be parallel to.  After the icon adjusts type in PLAN and type in your mtext. When done, type in UCS, hit enter, type W, hit enter and type PLAN and hit enter and your back where you started

 

3. Search the lisp forum to see if someone wrote a program to rotate Mtext, or post a request there to see if someone their could write one for you.

Active Contributor
jkwilliams
Posts: 29
Registered: ‎01-31-2011
Message 3 of 8 (478 Views)

Re: Inserting "MText" Parallel to a Line

09-22-2011 09:10 PM in reply to: azrdgldr

Thnaks for those options.

 

The LIsp option looks the best to me.

 

I'll investigate that path.

 

Many thanks for the suggestion.

*Expert Elite*
azrdgldr
Posts: 1,250
Registered: ‎01-09-2007
Message 4 of 8 (464 Views)

Re: Inserting "MText" Parallel to a Line

09-23-2011 08:25 AM in reply to: jkwilliams

Sorry forgot to add. There is a rotation option while creating mtext.  You can use the endponts of the linetype as reference.  I assumed your mtext objects were all ready created.

Active Contributor
jkwilliams
Posts: 29
Registered: ‎01-31-2011
Message 5 of 8 (452 Views)

Re: Inserting "MText" Parallel to a Line

09-25-2011 03:49 PM in reply to: jkwilliams

Thanks for that suggestion, I will investigate that one as well.

Best Regards, Jim

*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 6 of 8 (418 Views)

Re: Inserting "MText" Parallel to a Line

10-18-2011 07:36 AM in reply to: jkwilliams

Have you tried the TORIENT command?


Credit where credit is due! Give kudos or accept as solution whenever you can.

Active Contributor
jkwilliams
Posts: 29
Registered: ‎01-31-2011
Message 7 of 8 (402 Views)

Re: Inserting "MText" Parallel to a Line

10-18-2011 01:55 PM in reply to: jkwilliams

Thanks for the tip on the "torient" command, that will be useful for both text and blosks also.

Regards,

Jim

Valued Contributor
jhjirak
Posts: 65
Registered: ‎11-22-2011
Message 8 of 8 (265 Views)

Re: Inserting "MText" Parallel to a Line

07-16-2012 01:05 PM in reply to: jkwilliams

there are lisp routines that not only set the text to the same angle has the line, but the set the spacing between the text and the line.  That way your drawings look cleaner.  Lisp is the way to go.  Search Lee Mac in google.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.