Drafting Techniques

Drafting Techniques

Reply
Distinguished Contributor
bjenks
Posts: 152
Registered: ‎09-27-2006
Message 1 of 5 (305 Views)
Accepted Solution

Electrical Switch/Receptacle note directions

305 Views, 4 Replies
07-23-2012 10:38 AM

I am trying to figure out if there is any standard or preferred way to put switches and receptacles on a drawing with type and group symbols.  I personally always make the facing the wall on the right side, but that makes them upside down in certain situations.  I would be interest in peoples comments by selecting a number for each wall on the standard they have or know about.

 

Switches.JPG

I would use 5 for left or right, and 4 if there were space constraints.

*Expert Elite*
GrantsPirate
Posts: 1,640
Registered: ‎08-15-2008
Message 2 of 5 (300 Views)

Re: Electrical Switch/Receptacle note directions

07-23-2012 04:09 PM in reply to: bjenks

They should read from the bottom or right side of the drawing like any other text, dim, etc. in a drawing.  Don't put text upside down.

----------------------------------------------------------------------------
If something I wrote can be interpreted two ways, and one of the ways makes you sad or angry, I meant the other one.
Distinguished Contributor
bjenks
Posts: 152
Registered: ‎09-27-2006
Message 3 of 5 (292 Views)

Re: Electrical Switch/Receptacle note directions

07-24-2012 05:17 AM in reply to: GrantsPirate

So for the top you would say #3, bottom #9, but what number would you pick for the right and left?

*Expert Elite*
GrantsPirate
Posts: 1,640
Registered: ‎08-15-2008
Message 4 of 5 (290 Views)

Re: Electrical Switch/Receptacle note directions

07-24-2012 05:57 AM in reply to: bjenks

I would use 5 for left or right, and 4 if there were space constraints.

----------------------------------------------------------------------------
If something I wrote can be interpreted two ways, and one of the ways makes you sad or angry, I meant the other one.
*Expert Elite*
GrantsPirate
Posts: 1,640
Registered: ‎08-15-2008
Message 5 of 5 (273 Views)

Re: Electrical Switch/Receptacle note directions

07-24-2012 07:44 PM in reply to: bjenks

You need to use 9 for top and bottom, 8 if space constraints.

----------------------------------------------------------------------------
If something I wrote can be interpreted two ways, and one of the ways makes you sad or angry, I meant the other one.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!