Zoom problem

[andreas.walder]

Hi folks I am new to this forum and also in Fusion 360. I encountered a problem when zooming in into my part. If I reach a certain zoom level (not very high) the model is represented wrongly. It does not matter which perspective I choose. In the attached gif animation you have to look on the right side.

Who can help me please?

Greetings Andi

[TrippyLighting]

Does that problem persist when you cntinue to zoom and rotate the model ?

[chengyun.yang]

Hi, I may know what is the reason for this issue. Would you please share your model with me so I can check it? You can either send me through email(chengyun.yang@autodesk.com) or give me a public share link. Thanks Chengyun Fusion Development Team

[andreas.walder]

Hi I invited you chengyun.yang! Thanks for your effort!

And yes the problem is consistent however i move the part!

[chengyun.yang]

Thanks!

I have reproduced this issue on my side using your model. One internal bug has been created to track this one and I am working on the fix for it. 

This is the first time I saw this kind of problem. May I know how you created the base feature of this body? That might help me understand what operation could cause this issue.

Thanks

Chengyun

Fusion Development Team

[andreas.walder]

I got the model as an *.step file and imported it into Fusion 360. Would it be helpful for you if I send you that file?

Greetings Andi

[chengyun.yang]

Yes, please send me the original STEP file. Thanks!

Chengyun

Fusion Development Team

[andreas.walder]

Hi I attached the original *.step file which I included into Fusion 360!

Greetings Andi

[chengyun.yang]

Got it. Thanks!

-Chengyun

[andreas.walder]

Hey I just wanted to ask if there is any progress with this bug?

Greetings Andi

[chengyun.yang · Accepted solution]

Hi, 

We have fixed this problem internally. We are evaluating its impact to determine which release should include this fix. It is mostly likely it will be available in March release. But if this is blocking your work, we will see if we can push hard to get it to be released in our late Feb update. 

Thanks

Chengyun

Fusion Development

[andreas.walder]

Wow nice that you could fix it.  I appreciate your effort. Actually this bug did not effect the CAM and therefore I already machined the part. So I am fine with the March release!

Thank you! Greetings

Andi