Design Review

Reply
Mentor
thebearjed
Posts: 234
Registered: ‎10-05-2009
Message 1 of 4 (1,151 Views)
Accepted Solution

Save Changes

1151 Views, 3 Replies
10-29-2012 01:09 PM

i have created a 3D DWF from my Autocad drawing. i opened the .dwfx and made some changes then when i went to save the button was greyed out?

I do not know RD well enough but I suspect it's not able to save those types of changes, only markups and distance or dimensions placed on the dwfx.

*Pro
ampster
Posts: 1,280
Registered: ‎07-26-2005
Message 2 of 4 (1,150 Views)

Re: Save Changes

10-29-2012 01:17 PM in reply to: thebearjed

just tested placing a dimension a 3d dwfx file and Save was available and not grayed out.

 

What changes are you making to the dwfx file in RD?

Mentor
thebearjed
Posts: 234
Registered: ‎10-05-2009
Message 3 of 4 (1,135 Views)

Re: Save Changes

10-30-2012 01:20 PM in reply to: ampster

ok, it is saving but it is not retaining any of the transparency or view changes that i have made?

*Pro
ampster
Posts: 1,280
Registered: ‎07-26-2005
Message 4 of 4 (1,130 Views)

Re: Save Changes

10-30-2012 01:57 PM in reply to: thebearjed

I do not know RD well enough but I suspect it's not able to save those types of changes, only markups and distance or dimensions placed on the dwfx.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.