Design Review

Design Review

Active Member
Posts: 9
Registered: ‎09-09-2013
Message 1 of 2 (184 Views)

multi-body parts in design review

184 Views, 1 Replies
03-17-2014 02:57 AM



Sometimes I design a single part that has two or more solid bodies in it. This is usefull for us and as we use Inventor we can hide the solid bodies if we need to look inside/past them.


But some of the other guys in the company only use Autodesk design review and when they open the .DWXF file of the part it only shows up as being one solid body and they see that its actually made up of several solid bodies.


Is there a way to look at these parts in Autodesk design review and be able to look at the solid bodies, in one part, seperatley.




P Kee

*Expert Elite*
Posts: 23,722
Registered: ‎11-06-2003
Message 2 of 2 (174 Views)

Re: multi-body parts in design review

03-17-2014 05:33 AM in reply to: pkee
You might get more answers if you posted and asked fellow Inventor users too while you wait here.

If you can, also share your non-DWF file with the "single part with two or more solid bodies in it" for them to replicate the issue.
Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.