Design Review
Welcome to Autodesk’s Design Review Forums. Share your knowledge, ask questions, and explore popular Design Review topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Materials wash out in DR 9.0

4 REPLIES 4
Reply
Message 1 of 5
JMoore
424 Views, 4 Replies

Materials wash out in DR 9.0

When viewing my model in DR my materials get "washed out" when viewing from certain angles or a distance. The attached image properly shows the materials on the front of the house but the lighting washes them out on the side.

Any suggestions or ideas why this is happening or what I can do to correct it?

Thanks
Jay
4 REPLIES 4
Message 2 of 5
Anonymous
in reply to: JMoore

Please send us the original design and corresponsing DWF file for further
invetigation, thank you.

I would also need some additional details as to what application you are
using for the publishing process.

wrote in message news:5929020@discussion.autodesk.com...
When viewing my model in DR my materials get "washed out" when viewing from
certain angles or a distance. The attached image properly shows the
materials on the front of the house but the lighting washes them out on the
side

Any suggestions or ideas why this is happening or what I can do to correct
it?

Thanks
Jay
Message 3 of 5
JMoore
in reply to: JMoore

Thanks for the reply and offer to check it out. Where do I need to send the original file?

Thanks
Jay
Message 4 of 5
Anonymous
in reply to: JMoore

volker.joseph@autodesk.com

wrote in message news:5929539@discussion.autodesk.com...
Thanks for the reply and offer to check it out. Where do I need to send the
original file?

Thanks
Jay
Message 5 of 5
JMoore
in reply to: JMoore

Scott and Volker,

Thanks for the help. I kept running through the model and found the solution. I was viewing it with the "Published View" lighting and that was causing the washed out effect. When I changed the lighting to "Primary" all looked normal. Attached is a screen shot of the same image just being viewed with "Primary" lighting selection.

Thanks
Jay

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report