Please advise if there is a way to setup in Autodesk Design Review so the line and dimensions could be look the same when it zoom in. Please refer to a screen shot for more detail. Now it looks thicker when zoom in.
I created it, I am a CAD Adminstrator at Anemostat Products. My Engineering manager requested that the lines and dimensions must look the same when zoom in on Autodesk Design Review as it does on Autodesk Inventor. I do not see any features control the line weight on Autodesk Design Review. If you do please advise, thanks.
You'll have to ask in Inventor forum how to create lines in PDF that all look alike: in AutoCAD, what you describe is either a plot style table setting or an LWEIGHT setting that needs to be removed before the viewer gets a hold of the file.
An Autodesk Viewer does not alter a file's settings, it only views what was created by the file supplier: how did you do that in the first place is what you need to change.
Can you or someone help me how to set up in Autodesk Design Review so the line can look thin still when zoom in.
Please refer to attachment for more detail. It is in DWF format not in dwg or idw.
If Autodesk Design Review does not have this feature, please advise too.
We have this same issue, and would like to know if there is a fix or not.
dwf, like pdf is effectively a print/plot file. So the lineweight is set to the page.
You cannot 'turn off' line weights in ADR. This has been requested by me from Autodesk. Will have to wait and see...
Meanwhile, <ctrl>5 will turn off line weights in adobe reader/acrobat
Line thickness works upon the base file Line Weight settings. So when you create the dwf you need to set the line weight setting of that file (Revit/CAD).
Access a broad range of knowledge to help get the most out of your products and services.